Home › Drivetrain › K120 (CVT) › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM › from 2021.02
RM33A0E _52 Drivetrain _098634 K120 CVT _0461913 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM U

K120 CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  TERMINALS OF ECU  


TCM


C397733N10
3.208,0.167 3.625,0.417 0.417,0.25 3.25,0.219 3.708,0.417 0.458,0.198 10 false C111

HINT:

The standard voltage and resistance between each pair of TCM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C111-1 (+B) - C111-2 (E1) L - B Power source of TCM Ignition switch ON 11 to 14 V
C111-2 (E1) - Body ground B - Body ground Ground Always Below 1 Ω
C111-4 (SLS+) - C111-3 (SLS-) P - Y Shift solenoid valve SLS signal Engine idling Pulse generation
C111-6 (SLU+) - C111-5 (SLU-) L - G Shift solenoid valve SLU signal Lock-up turned from OFF to ON Pulse generation
C111-7 (NSSO) - C111-2 (E1) L - B Transmission revolution sensor (NSS) signal Vehicle being driven with shift lever in D Pulse generation
C111-8 (NC1O) - C111-2 (E1) R - B Transmission revolution sensor (NC1) signal Vehicle being driven in gear mode Pulse generation
C111-9 (NTO) - C111-2 (E1) V - B Transmission revolution sensor (NT) signal Vehicle being driven with shift lever in D Pulse generation
C111-10 (NOO) - C111-2 (E1) G - B Transmission revolution sensor (NOUT) signal Vehicle being driven with shift lever in D Pulse generation
C111-13 (NE) - C111-2 (E1) B - B Crankshaft position sensor signal from ECM Engine idling with warm engine Pulse generation
C111-14 (S) - C111-2 (E1) GR - B M position switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever not in M


Below 1 V
C111-15 (CANH) - C111-2 (E1) P - B CAN communication line Ignition switch ON Pulse generation
C111-16 (CANL) - C111-2 (E1) V - B CAN communication line Ignition switch ON Pulse generation
C111-17 (CAN-) - C111-2 (E1) L - B CAN communication line to ECM Ignition switch ON Pulse generation
C111-18 (CAN+) - C111-2 (E1) B - B CAN communication line to ECM Ignition switch ON Pulse generation
C111-19 (SL2+) - C111-20 (SL2-) GR - G Shift solenoid valve SL2 signal Vehicle being driven in belt mode Pulse generation
C111-21 (SLG+) - C111-22 (SLG-) R - L Shift solenoid valve SLG signal
·

Vehicle being driven in gear mode

·

Shift lever in P


Pulse generation
C111-23 (NSSB) - C111-2 (E1) P - B Power source of transmission revolution sensor (NSS) Ignition switch ON 11 to 14 V
C111-24 (NC1B) - C111-2 (E1) W - B Power source of transmission revolution sensor (NC1) Ignition switch ON 11 to 14 V
C111-25 (NTB) - C111-2 (E1) G - B Power source of transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
C111-26 (NOB) - C111-2 (E1) R - B Power source of transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
C111-27 (SFTD) - C111-2 (E1) W - B Down-shift switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "-"


Below 1 V
C111-28 (SFTU) - C111-2 (E1) G - B Up-shift switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "+"


Below 1 V
C111-29 (P) - C111-2 (E1) B - B P position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
C111-30 (R) - C111-2 (E1) W - B R position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
C111-31 (D) - C111-2 (E1) G - B D position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
C111-32 (N) - C111-2 (E1) L - B N position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
C111-38 (SL1+) - C111-37 (SL1-) V - B Shift solenoid valve SL1 signal Vehicle being driven in gear mode Pulse generation
C111-40 (SLP+) - C111-39 (SLP-) LG - R Shift solenoid valve SLP signal Engine idling Pulse generation
C111-41 (IGSW) - C111-2 (E1) P - B Ignition switch signal Ignition switch ON 11 to 14 V
C111-43 (STP) - C111-2 (E1) SB - B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
C111-45 (VCSF) - C111-44 (E2SF) G - L Power source of shift stroke sensor Ignition switch ON 4.5 to 5.5 V
C111-46 (SFV) - C111-44 (E2SF) W - L Shift stroke sensor signal Synchronizer engaged 1.19 to 1.29 V
Synchronizer not engaged 3.64 to 3.74 V
C111-49 (VCPT) - C111-48 (EPTO) L - B Power source of oil pressure sensor Ignition switch ON 4.5 to 5.5 V
C111-50 (PTO) - C111-48 (EPTO) G - B Oil pressure sensor signal Engine idling with shift lever in P 0.8 to 1.2 V
C111-51 (THO1) - C111-52 (ETHO) B - BR CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V


ECM


C398924N18
5.542,0.25 5.958,0.5 0.417,0.25 1.75,0.25 2.167,0.5 0.417,0.25 5.635,0.302 6.094,0.5 0.458,0.198 10 false A24 1.833,0.302 2.292,0.5 0.458,0.198 10 false C57

HINT:

The standard voltage and resistance between each pair of ECM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A24-7 (CANP) - A24-10 (E1) B - W-B CAN communication line to TCM Ignition switch ON Pulse generation
A24-9 (+B) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V
A24-16 (NEO) - A24-10 (E1) B - W-B Crankshaft position sensor signal to TCM Engine idling with warm engine Pulse generation
A24-17 (CANN) - A24-10 (E1) L - W-B CAN communication line to TCM Ignition switch ON Pulse generation
A24-35 (+B2) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V