CHECK VEHICLE CONTROL HISTORY (AUTOMATIC TRANSAXLE SYSTEM)
The Vehicle Control History stores the history of the reject function and system protection operations.
The number of occurrences, date and distance are stored in batches for each item.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
| Code | Tester Display | Measurement Item | Diagnostic Note |
|---|---|---|---|
| X0908 | Large Increase in Engine Speed | ·
History of turbine speed becoming temporarily higher than usual after shifting gears ·
History of shift delay when shifting gears ·
History of large change in force when shifting gears |
- |
| X0909 | Shift Position Reversed During Forward/Backward Movement | History of shift lever being moved from D or R with the vehicle being driven at a certain vehicle speed or more | Make sure not to unintentionally touch the shift lever or do not hang objects on the shift lever |
| X090C | High A/T Oil Temperature | History of the ATF temperature exceeding the threshold and a warning being output after starting the engine
(A shift pattern which prioritizes lower engine speed gear shift is used until the ATF temperature drops, in order to protect the automatic transaxle assembly) |
- |
CLEAR VEHICLE CONTROL HISTORY (AUTOMATIC TRANSAXLE SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB) (Clear).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
VEHICLE CONTROL HISTORY FREEZE FRAME DATA (AUTOMATIC TRANSAXLE SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
Select a Vehicle Control History item to display its freeze frame data.
| Tester Display | Description |
|---|---|
| Total Distance Traveled | Total driven distance |
| Total Distance Traveled - Unit | Unit for total driven distance |
| Acceleration Sensor Correct Value | Acceleration sensor calibration value |
| Throttle Position for Shift Point Control | Throttle position for shift point control |
| Stop Light SW | Brake pedal operation |
| Shift Range Signal | Shift range |
| Turbine Rotation Speed | Input shaft speed |
| Speed (SP2) | ECT vehicle speed |
| A/T Oil Temperature No.1 | ATF temperature sensor value |
| Output Axis Speed | Output shaft speed |
| Current Virtual Gear Position | Gear position |
| Target Gear Position (ECT) | Target gear position |
| Large Increase in Engine Speed Count | Sudden increase in engine speed judgment occurrence count |
| Shift Position Reversed During Forward/Backward Movement Count | Shift position reversed while driving occurrence count |
| High A/T Oil Temperature Count | High ATF temperature occurrence count |
| Solenoid (SL) | Solenoid (SL) valve status |
VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)
A part of the control history can be confirmed using the vehicle control history.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>VEHICLE CONTROL HISTORY