Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2021.02
RM33A0E _51 Engine / Hybrid System _098626 M20A-FKS ENGINE CONTROL _0462095 CAMSHAFT OIL CONTROL VALVE A

M20A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 135A0B 1.INSTALL CAMSHAFT TIMING VALVE ASSEMBLY

a.

Temporarily install the camshaft timing valve assembly to the camshaft timing exhaust gear assembly.

NOTICE:
·

If the camshaft timing valve assembly has been struck or dropped, replace it.

·
A464267

Make sure to fit the protrusion of the camshaft timing valve assembly into the cutout of the camshaft timing exhaust gear assembly.




b.

Using a 5 mm hexagon socket wrench, install the camshaft timing valve assembly with the bolt.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


c.

Pull the camshaft timing valve assembly to confirm that is installed securely.


Hide 15370 2.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY