Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting) › from 2021.02
RM33A0E _51 Engine / Hybrid System _098626 M20A-FKS ENGINE CONTROL _0462099 VACUUM SWITCHING VALVE(for Engine Mounting) A

M20A-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  INSTALLATION  


PROCEDURE

Hide 17650H 1.INSTALL VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.

Install the vacuum switching valve (for active control engine mount system) to the front engine mounting insulator with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the 3 vacuum hoses to the vacuum switching valve (for active control engine mount system).


c.

Engage the wire harness clamp and connect the vacuum switching valve (for active control engine mount system) connector.


Hide 53852K 3.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851M 4.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH