Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › OIL PRESSURE SWITCHING VALVE › from 2021.02
RM33A0E _51 Engine / Hybrid System _098631 M20A-FKS LUBRICATION _0462219 OIL PRESSURE SWITCHING VALVE A

M20A-FKS LUBRICATION  OIL PRESSURE SWITCHING VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 53736 1.REMOVE FRONT FENDER APRON SEAL RH

Hide 15250 2.REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY

a.
A402130

Disconnect the oil pressure control valve assembly connector.


b.

Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the No. 2 timing chain cover assembly.