Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › OIL PAN AND OIL LEVEL SENSOR › from 2021.02
RM33A0E _51 Engine / Hybrid System _098631 M20A-FKS LUBRICATION _0462220 OIL PAN AND OIL LEVEL SENSOR A

M20A-FKS LUBRICATION  OIL PAN AND OIL LEVEL SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 89491 3.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the engine oil level sensor connector.


b.
A434735

Remove the clip from the engine oil level sensor.


c.
A434736

Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the engine balancer assembly.