Home › Engine / Hybrid System › M20A-FKS (LUBRICATION) › ENGINE OIL COOLER › from 2021.02
RM33A0E _51 Engine / Hybrid System _098631 M20A-FKS LUBRICATION _0462222 ENGINE OIL COOLER A

M20A-FKS LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 15710 3.REMOVE OIL COOLER ASSEMBLY

a.
A432710C01
1.25,0.958 0.854,0.958 true 2.948,1.448 2.813,1.448 2.813,1.448 2.573,1.125 true 0.708,0.875 0.875,1.063 0.167,0.188 10 true *1 3,1.354 3.198,1.542 0.198,0.188 10 true *2
*1 No. 1 Water By-pass Hose
*2 No. 2 Water By-pass Hose


Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the oil cooler assembly.


b.
A433217

Remove the bolt, 2 nuts and oil cooler assembly from the cylinder block sub-assembly.


c.
A426833

Remove the 2 oil cooler gaskets from the oil cooler assembly.


d.

w/ Filter:

i.
A433218

Remove the oil control valve filter from the cylinder block sub-assembly.