Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › TELLTALE LIGHT ASSEMBLY › from 2021.02
RM33A0E _58 Vehicle Interior _065383 SUPPLEMENTAL RESTRAINT SYSTEMS _0327354 TELLTALE LIGHT ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  TELLTALE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83950M 1.INSPECT PASSENGER AIRBAG ON/OFF INDICATOR (TELLTALE LIGHT ASSEMBLY)

a.
B467161C01
0.719,0.938 1.469,0.938 false 2.802,1.49 1.958,0.948 false 1.115,1.49 1.875,0.938 false 0.073,0.052 0.521,0.521 0.448,0.469 10 false *a 0.906,1.5 1.438,1.802 0.531,0.302 10 false PAON 2.667,1.5 3.281,1.833 0.615,0.333 10 false P-AB 0.469,0.865 0.969,1.365 0.5,0.5 10 false IG+
*a Component without harness connected
(Passenger Airbag ON/OFF Indicator (Telltale Light Assembly))


Apply battery voltage to the connector and check the passenger airbag ON/OFF indicator (telltale light assembly) condition.

OK:
Connection Result
Battery positive (+) - 10 (IG+)
Battery negative (-) - 5 (PAON)
"ON" comes on
Battery positive (+) - 10 (IG+)
Battery negative (-) - 4 (P-AB)
"OFF" comes on


If the result is not as specified, replace the passenger airbag ON/OFF indicator (telltale light assembly).