44772
1.DISCONNECT CHECK VALVE TO CONNECTOR TUBE HOSE
Slide the clip and disconnect the check valve to connector tube hose from the brake booster assembly.
44774
2.DISCONNECT UNION TO CONNECTOR TUBE HOSE
Slide the clip and disconnect the union to connector tube hose from the No. 1 vacuum hose connector.
44763A
3.REMOVE NO. 1 HOSE TO HOSE TUBE
Remove the 2 nuts and No. 1 hose to hose tube.
44772
4.REMOVE CHECK VALVE TO CONNECTOR TUBE HOSE
Slide the clip and remove the check valve to connector tube hose from the No. 1 hose to hose tube.
Remove the 2 clips from the check valve to connector tube hose.
44774
5.REMOVE UNION TO CONNECTOR TUBE HOSE
Slide the clip and remove the union to connector tube hose from the No. 1 hose to hose tube.
Remove the 2 clips from the union to connector tube hose.
44777
6.REMOVE NO. 1 VACUUM HOSE CONNECTOR
Disconnect the vacuum hose from the No. 1 vacuum hose connector.
| *a | Retainer |
|
Pinch |
|
Pull off |
Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.
Be sure to remove the No. 1 vacuum hose connector by hand.