Home › Engine / Hybrid System › M20A-FKS (FUEL) › FUEL MAIN VALVE › from 2021.02
RM33A0E _51 Engine / Hybrid System _098628 M20A-FKS FUEL _0462957 FUEL MAIN VALVE A

M20A-FKS FUEL  FUEL MAIN VALVE  INSTALLATION  


PROCEDURE

Hide 23070 1.INSTALL FUEL MAIN VALVE ASSEMBLY (for High Pressure)

a.

for Type A:

i.

Apply gasoline to a new O-ring. Then install the O-ring to the fuel main valve assembly.

NOTICE:
A406613C01
0.844,0.615 0.979,0.615 0.979,0.615 1.208,0.833 false 0.833,1.719 0.969,1.719 0.969,1.719 1.135,1.385 false 1.75,0.729 1.833,0.365 1.833,0.365 1.948,0.365 false 2.01,0.292 2.323,0.448 0.313,0.156 10 false *1 0.677,0.521 0.99,0.677 0.313,0.156 10 false *a 0.667,1.625 0.979,1.781 0.313,0.156 10 false *b 1.198,0.24 1.51,0.396 0.313,0.156 10 false *c
*1 Fuel Main Valve Assembly
*a Mesh
*b Mini-clip
*c No Clearance


Make sure that there is no clearance between the fuel main valve assembly and mesh.



ii.

Install the fuel main valve assembly to the fuel filter.

NOTICE:

Make sure that the O-ring is not cut or pinched during installation.



iii.

Install the clip to the fuel filter.



b.

for Type B:

i.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly.


ii.
A502665C01
0.885,3.146 1.333,3.146 true 1.375,3.052 1.74,3.292 0.365,0.24 10 false *a
*a Identification Mark (Part Number)


Install the fuel main valve assembly to the fuel filter.

NOTICE:
·

Make sure that the O-rings are not cut or pinched during installation.

·

The fuel main valve assembly (for Low Pressure) and fuel main valve assembly (for High Pressure) have identification marks (part numbers). If the parts are installed in the incorrect positions, the engine may stall. Therefore, make sure to install the parts in the correct positions.



HINT:
Identification Mark (Part Number) 23070-36***



iii.

Install the clip to the fuel filter.



Hide 23070 2.INSTALL FUEL MAIN VALVE ASSEMBLY (for Low Pressure)

a.

for Type A:

i.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly.


ii.

Install the fuel main valve assembly to the fuel filter.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



iii.

Install the clip to the fuel filter.



b.

for Type B:

i.

Apply gasoline to 2 new O-rings. Then install the O-rings to the fuel main valve assembly.


ii.
A502666C01
2.25,3.146 2.698,3.146 true 2.073,3.073 2.438,3.313 0.365,0.24 10 false *a
*a Identification Mark (Part Number)


Install the fuel main valve assembly to the fuel filter.

NOTICE:
·

Make sure that the O-rings are not cut or pinched during installation.

·

The fuel main valve assembly (for Low Pressure) and fuel main valve assembly (for High Pressure) have identification marks (part numbers). If the parts are installed in the incorrect positions, the engine may stall. Therefore, make sure to install the parts in the correct positions.



HINT:
Identification Mark (Part Number) 23070-31***



iii.

Install the clip to the fuel filter.



Hide 3.INSTALL FUEL FILTER (for Type A)

a.

Apply gasoline to a new O-ring. Then install the O-ring to the fuel sub-tank.


b.
A401698

Install the fuel filter to the fuel sub-tank as shown in the illustration.

NOTICE:

Make sure that the O-ring is not cut or pinched during installation.



c.

Engage the 3 claws.

NOTICE:

Securely engage the claws.



d.

Engage the clamp to connect the tube to the fuel filter.


Hide 23221 4.INSTALL FUEL PUMP (for Type B)

Hide 83320 5.INSTALL FUEL SENDER GAUGE ASSEMBLY