Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2021.02–2021.08
RM33A0E _58 Vehicle Interior _065387 HEATING / AIR CONDITIONING _0327417 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) U

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  TERMINALS OF ECU  


CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


E328992C41
2.99,1.969 3.354,2.208 0.365,0.24 4.365,1.969 4.729,2.208 0.365,0.24 5.625,1.969 5.99,2.208 0.365,0.24 3.906,0.125 4.271,0.365 0.365,0.24 5.094,0.125 5.458,0.365 0.365,0.24 2.542,0.125 2.906,0.365 0.365,0.24 1.594,1.979 1.958,2.219 0.365,0.24 3.063,2.01 3.521,2.208 0.458,0.198 10 false K55 4.438,2.01 4.896,2.208 0.458,0.198 10 false K54 5.698,2.01 6.156,2.208 0.458,0.198 10 false z11 2.604,0.177 3.063,0.375 0.458,0.198 10 false K55 3.979,0.167 4.438,0.365 0.458,0.198 10 false K54 5.167,0.167 5.625,0.365 0.458,0.198 10 false z11 0.104,0.094 0.563,0.292 0.458,0.198 12 false *A 0.115,2.01 0.573,2.208 0.458,0.198 12 false *B 1.656,2.021 2.115,2.219 0.458,0.198 10 false K56
*A w/o Seat Heater *B w/ Seat Heater


HINT:

Check from the rear of the connector while it is connected to the air conditioning amplifier assembly.


Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
K55-1 (SG-1) - Body ground LG - Body ground Ground for cooler (room temp. sensor) thermistor Always Below 1 V
K55-2 (SG-2) - Body ground W - Body ground Ground for thermistor assembly Always Below 1 V
K55-3 (SG-4) - Body ground L - Body ground Ground for air conditioner pressure sensor Always Below 1 V
K55-6 (S5-3) - K55-3 (SG-4) GR - L Power supply for air conditioner pressure sensor Ignition switch ON 4.75 to 5.25 V
Ignition switch off Below 1 V
K55-9 (MGC) - K54-4 (GND)*1 G - W-B Magnet clutch operation signal
·

Engine running

·

Blower switch: LO

·

A/C switch: Off


11 to 14 V
·

Engine running

·

Blower switch: LO

·

A/C switch: On


Below 1 V
K55-13 (TAM) - K55-2 (SG-2) R - W Thermistor assembly signal
·

Ignition switch ON

·

Ambient temperature: 25°C (77°F)


1.05 to 1.45 V
·

Ignition switch ON

·

Ambient temperature: 40°C (104°F)


0.64 to 0.87 V
K55-14 (TR) - K55-1 (SG-1) GR - LG Cooler (room temp. sensor) thermistor signal
·

Ignition switch ON

·

Cabin temperature: 25°C (77°F)


1.05 to 1.45 V
·

Ignition switch ON

·

Cabin temperature: 40°C (104°F)


0.64 to 0.87 V
K55-20 (ECOS) - K54-4 (GND)*2 W - W-B ECO switch assembly (electric parking brake switch assembly) signal
·

Ignition switch ON

·

ECO switch assembly (electric parking brake switch assembly): Off


11 to 14 V
·

Ignition switch ON

·

ECO switch assembly (electric parking brake switch assembly): On


Below 1 V
K55-21 (LOCK) - K55-2 (SG-2)*1 B - W A/C lock sensor signal
·

Engine running

·

Blower switch: LO

·

A/C switch: On


Pulse generation
(See waveform 1)
K55-24 (PRE) - K55-3 (SG-4) W - L Air conditioner pressure sensor signal
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (more than 3.025 MPaG (30.8 kgf/cm2, 439 psi))


4.61 V or higher
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (less than 0.176 MPaG (1.8 kgf/cm2, 26 psi))


Below 0.74 V
·

Engine running

·

Air conditioning system operating

·

Refrigerant pressure: Normal pressure (less than 3.025 MPaG (30.8 kgf/cm2, 439 psi) and more than 0.176 MPaG (1.8 kgf/cm2, 26 psi))


0.74 to 4.61 V
K54-1 (B) - K54-4 (GND) LA-B - W-B Power source (Back-up) Always 11 to 14 V
K54-2 (IG+) - K54-4 (GND) LA-GR - W-B Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
K54-3 (SOL+) - K54-4 (GND) R - W-B Compressor solenoid operation signal
·

Engine running

·

Blower switch: LO

·

A/C switch: On


Pulse generation
(See waveform 2)
K54-4 (GND) - Body ground W-B - Body ground Ground for main power supply Always Below 1 V
K54-6 (BLW) - K54-4 (GND) LG - W-B Blower motor speed control signal
·

Ignition switch ON

·

Blower switch: LO


Pulse generation
(See waveform 3)
K54-7 (NANO) - K54-4 (GND)*3 LG - W-B Ion generator sub-assembly operation signal
·

Ignition switch ON

·

Blower switch: On


Below 1 V
·

Ignition switch ON

·

Blower switch: Off


4.75 to 5.25 V
K54-11 (CANH) - K54-12 (CANL) SB - W CAN communication system CAN communication is performed Pulse generation
K54-14 (LIN1) - K54-4 (GND) BE - W-B LIN communication signal Ignition switch ON Pulse generation
(See waveform 4)
K54-26 (NAIN) - K54-4 (GND)*3 BE - W-B Ion generator sub-assembly operation condition signal
·

Ignition switch ON

·

Blower switch: On


Below 2.2 V
·

Ignition switch ON

·

Blower switch: Off


4.75 to 5.25 V
z11-2 (BUS G) - Body ground - Ground for BUS IC Always Below 1 V
z11-3 (BUS) - z11-2 (BUS G) - BUS IC control signal Ignition switch ON Pulse generation
(See waveform 5)
z11-4 (B BUS) - z11-2 (BUS G) - Power supply for BUS IC Ignition switch off 11 to 14 V
z11-5 (SG) - Body ground GR - Body ground Ground for No. 1 cooler thermistor Always Below 1 V
z11-6 (TE) - z11-5 (SG) GR - GR No. 1 cooler thermistor signal
·

Ignition switch ON

·

Evaporator temperature: 0°C (32°F)


1.7 to 2.1 V
·

Ignition switch ON

·

Evaporator temperature: 15°C (59°F)


0.9 to 1.3 V

*1: for 2GR-FKS

*2: w/ ECO Switch

*3: w/ Ion Generator


a.
E116941N06
0.177,0.948 0.542,1.146 0.365,0.198 10 false GND

Waveform 1:

Item Content
Terminal No. K55-21 (LOCK) - K55-2 (SG-2)
Tool Setting 200 mV/DIV., 10 ms./DIV.
Condition
·

Engine running

·

Blower switch: LO

·

A/C switch: On




b.
E145424N07
2.979,1.271 3.354,1.438 0.375,0.167 10 false GND

Waveform 2:

Item Content
Terminal No. K54-3 (SOL+) - K54-4 (GND)
Tool Setting 5 V/DIV., 500 μs./DIV.
Condition
·

Engine running

·

Blower switch: LO

·

A/C switch: On




c.
E338778N01
2.823,1.24 3.281,1.438 0.458,0.198 10 false GND

Waveform 3:

Item Content
Terminal No. K54-6 (BLW) - K54-4 (GND)
Tool Setting 2 V/DIV., 1 ms./DIV.
Condition
·

Ignition switch ON

·

Blower switch: LO




d.
E334619N02
0.313,1.563 0.771,1.76 0.458,0.198 10 false GND

Waveform 4:

Item Content
Terminal No. K54-14 (LIN1) - K54-4 (GND)
Tool Setting 2 V/DIV., 20 ms./DIV.
Condition Ignition switch ON


e.
E202803N05
0.333,1.469 0.75,1.646 0.417,0.177 10 GND

Waveform 5:

Item Content
Terminal No. z11-3 (BUS) - z11-2 (BUS G)
Tool Setting 2 V/DIV., 2 ms./DIV.
Condition Ignition switch ON



CHECK AIR CONDITIONING CONTROL ASSEMBLY


E368074N05
3.375,0.208 3.75,0.427 0.375,0.219 3.448,0.24 3.906,0.438 0.458,0.198 10 false K26

HINT:

Check from the rear of the connector while it is connected to the air conditioning control assembly.


Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
K26-2 (IG+) - K26-6 (GND) GR - W-B Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
K26-6 (GND) - Body ground W-B - Body ground Ground for air conditioning control assembly Always Below 1 V
K26-9 (LIN1) - Body ground LG - Body ground LIN communication signal Ignition switch ON Pulse generation
(See waveform)
K26-11 (ILL+) - Body ground W - Body ground Illumination signal Light control switch in off position Below 1 V
Light control switch in tail or head position 11 to 14 V
K26-15 (ILL-) - Body ground B - Body ground Illumination signal Always Below 1 V

a.
E202803N05
0.333,1.469 0.75,1.646 0.417,0.177 10 GND

Waveform:

Item Content
Terminal No. K26-9 (LIN1) - Body ground
Tool Setting 2 V/DIV., 20 ms./DIV.
Condition Ignition switch ON



COOLER CONTROL SWITCH ASSEMBLY (for 3 Zone Type)


E381437N01
3.26,0.354 3.719,0.573 0.458,0.219 3.406,0.406 3.719,0.604 0.313,0.198 10 false Z1

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
Z1-1 (ACC) - Z1-16 (GND) GR - W-B Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
Z1-9 (+B) - Z1-16 (GND) R - W-B Power source (+B) Always 11 to 14 V
Z1-10 (IG+) - Z1-16 (GND) L - W-B Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
Z1-11 (ILL+) - Body ground G - Body ground Illumination signal Light control switch in off position Below 1 V
Light control switch in tail or head position 11 to 14 V
Z1-13 (RLIN) - Body ground L - Body ground LIN communication signal Ignition switch ON Pulse generation
(See waveform)
Z1-16 (GND) - Body ground W-B - Body ground Ground Always Below 1 V

a.
E202803N05
0.333,1.469 0.75,1.646 0.417,0.177 10 GND

Waveform:

Item Content
Terminal No. Z1-13 (RLIN) - Body ground
Tool Setting 2 V/DIV., 20 ms./DIV.
Condition Ignition switch ON