Home › General › MAINTENANCE › M20A-FKS DRIVE BELT › from 2021.02
RM33A0E _V1 General _065356 MAINTENANCE _0463539 M20A-FKS DRIVE BELT A

MAINTENANCE  M20A-FKS DRIVE BELT  REMOVAL  


PROCEDURE

Hide 16361A 1.REMOVE V-RIBBED BELT

a.
A426052

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.


b.

Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.


c.

Remove the V-ribbed belt.