8646C
1.REMOVE FORWARD RECOGNITION CAMERA
86461
2.REMOVE FORWARD RECOGNITION HOOD
|
Inner Surface of Forward Recognition Hood |
Do not touch the inner surface of the forward recognition hood.
Do not apply force to the heating element of the forward recognition hood or an open circuit may result.
Disconnect the connector.
Do not pull the harness forcibly when disconnecting the connector.
| *a | Connector Clamp |
| *b | Wire Harness Clamp |
Disengage the connector clamp.
Disengage the 2 wire harness clamps in the order shown in the illustration.
Do not forcibly pull the wire harness as it may become damaged.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Pull the forward recognition hood in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.
Pull the forward recognition hood in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the forward recognition hood.