Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0463554 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake actuator assembly) operates the stop light switch assembly to illuminate the stop lights.

If the ECM receives a signal from the skid control ECU (brake actuator assembly) indicating a malfunction of the stop light switch assembly, DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the ECM detects a signal indicating a stop light switch assembly malfunction from the skid control ECU (brake actuator assembly) for approximately 1 second or more. Vehicle stability control system Cruise Control

PROCEDURE

1.CHECK VEHICLE STABILITY CONTROL SYSTEM
a.

Check vehicle stability control system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

If DTC P057113 is output by the dynamic radar cruise control system, perform troubleshooting for the vehicle stability control system first.



Result:
Proceed to
NEXT



NEXT

END