Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0342029 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE ROAD SIGN ASSIST SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the multi-information display

i.

Turn the ignition switch to ON.


ii.

Select the setting by referring to the table below.


iii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.


Road Sign Assist Setup
Display Description Setting Default Relevant ECU

*1: Display contents differ depending on the country.

*2: The set vehicle speed differs depending on the country or area.

RSA Road sign assist function setting On / Off On Forward recognition camera
Notification Method*1 Above Speed Limit Excess speed notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Overtaking Overtaking prohibition notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Others Other notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Notification Level Excess speed notification level setting*2 10 km/h (5 MPH) / 5 km/h (3 MPH) / 2 km/h (1 MPH) 2 km/h (1 MPH) Forward recognition camera
5 km/h / 3 km/h / 1 km/h 1 km/h