1.REMOVE ROOF CONSOLE BOX ASSEMBLY
867E1
2.REMOVE COMMUNICATION TELEMATICS BOX
Disconnect the connector.
Remove the 4 screws.
Disengage the 3 guides to remove the communication telematics box.
86713D
3.REMOVE MAYDAY WIRE
Perform this procedure only when replacement of the mayday wire is necessary.
| *a | Protective Tape |
|
Remove in this Direction |
Disengage the clamp.
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the mayday wire as shown in the illustration.