Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › from 2021.02
RM33A0E _54 Brake _065365 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0327182 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage between 9.6 and 16.5 V, a steering angle sensor internal malfunction signal is received from the steering angle sensor. Steering angle sensor

PROCEDURE

1.REPLACE STEERING ANGLE SENSOR
a.

Result:
Proceed to
NEXT



NEXT

END