Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING LIGHT › from 2021.02
RM33A0E _58 Vehicle Interior _065386 SEAT BELT _0327386 SEAT BELT WARNING LIGHT G

SEAT BELT  SEAT BELT WARNING LIGHT  INSPECTION  


PROCEDURE

Hide 83950M 1.INSPECT TELLTALE LIGHT ASSEMBLY

a.
B489644C01
0.677,1.448 0.813,1.135 false 1.719,1.49 1.719,1.156 false 2.781,1.438 2.615,1.146 false 0.594,1.469 0.906,1.667 0.313,0.198 10 false *a 1.656,1.5 1.969,1.698 0.313,0.198 10 false *b 2.74,1.458 3.052,1.656 0.313,0.198 10 false *c 0.49,1.979 0.802,2.177 0.313,0.198 10 false *d 0.125,0.115 0.5,0.354 0.375,0.24 10 false *1
*1 Rear seat belt warning light (Telltale Light Assembly)
*a LH
*b Center
*c RH
*d Component without harness connected
(Telltale Light Assembly)


Apply battery voltage to the connector according to the table below.

OK:
Battery Connection Result
Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 3
Rear seat belt warning light (RH) comes on
Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 2
Rear seat belt warning light (center) comes on
Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 1
Rear seat belt warning light (LH) comes on


If the result is not as specified, replace the telltale light assembly.