Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY › from 2021.02
RM33A0E _58 Vehicle Interior _065386 SEAT BELT _0327391 REAR SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73432 1.INSTALL REAR SEAT BELT RETRACTOR COVER

a.
B472886C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear seat belt retractor cover as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



Hide 73370E 2.INSPECT REAR SEAT OUTER BELT ASSEMBLY

Hide 73370E 3.INSTALL REAR SEAT OUTER BELT ASSEMBLY LH

a.

w/o Pretensioner:

i.
B502495E01
1.417,1.885 1.594,2.083 0.177,0.198 10 true A 1.604,0.052 1.781,0.25 0.177,0.198 10 true B

Engage the guide and temporarily install the rear seat outer belt assembly LH with the 2 bolts.


ii.

Fully tighten the bolt (A) and then the bolt (B) to install the rear seat outer belt assembly LH.

Torque:
Bolt (A) : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Bolt (B) : 42 N*m (428 kgf*cm, 31 ft.*lbf)


iii.

Check that the ELR locks.

NOTICE:

This check should be performed with the rear seat outer belt assembly LH installed to the vehicle.


1.

With the rear seat outer belt assembly LH installed to the vehicle, check that the belt locks when it is pulled out quickly.




b.

w/ Pretensioner:

i.
B471062E01
1.458,1.927 1.656,2.115 0.198,0.188 10 true A 1.49,0.042 1.688,0.229 0.198,0.188 10 true B

Engage the guide and temporarily install the rear seat outer belt assembly LH with the 2 bolts.


ii.

Fully tighten the bolt (A) and then the bolt (B) to install the rear seat outer belt assembly LH.

Torque:
Bolt (A) : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
Bolt (B) : 42 N*m (428 kgf*cm, 31 ft.*lbf)


iii.
B471061C01
2.042,0.938 2.406,0.646 true 1.854,0.844 2.125,1.052 0.271,0.208 10 false *a 2.594,0.323 2.823,0.51 0.229,0.188 10 false *b
*a Locking Button
*b Lock


Connect the pretensioner connector and lock the locking button as shown in the illustration.

NOTICE:

Securely lock the locking button.



iv.

Check that the ELR locks.

NOTICE:

This check should be performed with the rear seat outer belt assembly LH installed to the vehicle.


1.

With the rear seat outer belt assembly LH installed to the vehicle, check that the belt locks when it is pulled out quickly.




Hide 73360D 4.INSTALL REAR SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 64330 5.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

a.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.


b.

Engage the 3 clips and 5 guides.


c.

Install the package tray trim panel assembly with the 2 clips.


d.

Return the rear seatback assembly LH and rear seatback assembly RH to their original position.


Hide 64330 6.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

a.

Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.


b.

Engage the 3 clips.


Hide 73373F 7.INSTALL REAR SEAT SHOULDER BELT HOLE COVER

a.

Engage the 2 guides and 2 claws to install the rear seat shoulder belt hole cover.

HINT:

Use the same procedure for the other rear seat shoulder belt hole covers.



Hide 81006 8.INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

Hide 73370E 9.CONNECT REAR SEAT OUTER BELT ASSEMBLY LH

a.
B470180C01
0,0 0,0 false
V100155

Protruding Part


Connect the floor anchor of the rear seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the rear seat outer belt assembly LH to overlap the protruding parts of the floor panel.



Hide 73360D 10.CONNECT REAR SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62472A 11.INSTALL INNER ROOF SIDE GARNISH LH

Hide 62471A 12.INSTALL INNER ROOF SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 13.INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

Hide 62332A 14.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Fold Down Seat Type)

Hide 15.INSTALL REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)

HINT:

Use the same procedure as for the LH side.


Hide 62331A 16.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH (for Fold Down Seat Type)

Hide 72693 17.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

Hide 18.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

Hide 73350C 19.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type)

Hide 20.INSTALL REAR SEAT ASSEMBLY (for Reclining Seat Type)

Hide 21.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Pretensioner)

Hide 22. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Pretensioner)

Hide 23.INSPECT SRS WARNING LIGHT (w/ Pretensioner)