Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (w/o Automatic Headlight Beam Level Control System) › from 2021.02
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0341635 LIGHTING SYSTEM(w/o Automatic Headlight Beam Level Control System) D

LIGHTING (EXT)  LIGHTING SYSTEM(w/o Automatic Headlight Beam Level Control System)  OPERATION CHECK  


AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


NOTICE:

Make sure that the customize settings are set to default when performing the automatic light control system operation check.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/o Automatic Headlight Beam Level Control System)>CUSTOMIZE PARAMETERS


a.

Turn the ignition switch to ON.


b.

Turn the light control switch to the AUTO position.


c.

Cover the automatic light control sensor.


d.

Check that the taillights and low beam headlights come on.


e.

Uncover the automatic light control sensor.


f.

Check that the low beam headlights and taillights turn off.



LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK


NOTICE:

Make sure that the customize settings are set to default when performing the light auto turn-off system operation check.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/o Automatic Headlight Beam Level Control System)>CUSTOMIZE PARAMETERS


a.

Close all of the doors.


b.

Turn the ignition switch to ON.


c.

Turn the taillights, low beam headlights, high beam headlights, front fog lights* and rear fog lights on.


d.

Turn the ignition switch off.


e.

Open the driver door.


f.

Check that all of the lights turn off immediately.

*: w/ Front Fog Light




DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


a.

Start the engine.


b.

Turn the light control switch to the tail or AUTO position (with the low beam headlights not turned on via the automatic light control system).


c.

Release the parking brake.


d.

Check that the daytime running lights come on.