Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2021.02
RM33A0E _58 Vehicle Interior _065381 METER / GAUGE / DISPLAY _0323396 METER / GAUGE SYSTEM U

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  TERMINALS OF ECU  


COMBINATION METER ASSEMBLY


E342209N07
2.208,0.208 2.656,0.427 0.448,0.219 5.146,0.208 5.594,0.427 0.448,0.219 2.313,0.229 2.625,0.427 0.313,0.198 10 false K21 5.25,0.229 5.563,0.427 0.313,0.198 10 false K20

a.

Measure the voltage and resistance and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Signal Input/Output Condition Specified Condition
K21-1 (ILL-) - Body ground LA-L - Body ground Output Headlight dimmer switch off → Headlight dimmer switch in tail or head position Below 1 V → Pulse generation
K21-2 (EP) - Body ground W-B - Body ground - Always Below 1 Ω
K21-4 (INT) - Body ground*6 L - Body ground Output
·

Ignition switch ON

·

Steering pad switch assembly operated, "TPWS" selected on the multi-information display and "OK" switch (steering pad switch assembly) pressed and held → "OK" switch (steering pad switch assembly) off


Below 1.5 V → 8 to 15 V
K21-5 (SI) - Body ground W - Body ground Input Ignition switch ON, wheel being rotated Pulse generation (See waveform 1)
K21-6 (+S) - Body ground L - Body ground Output Ignition switch ON, wheel being rotated Pulse generation (See waveform 1)
K21-7 (VCM) - Body ground BE - Body ground Input Engine started, vacuum warning switch off (brake warning light off) → Vacuum warning switch on (brake warning light on) 11 to 14 V → Below 1 V
K21-9 (S) - Body ground*1 LA-R - Body ground Input Engine not started → Engine started Below 1 V → 11 to 14 V
K21-10 (PBKL) - Body ground*7
·

B - Body ground*3

·

G - Body ground*4


Input Ignition switch ON, front passenger seat belt unfastened → Fastened Below 1 V → 11 to 14 V
K21-11 (PODS) - Body ground*7 L - Body ground Input Ignition switch ON, front passenger seat not occupied → occupied 11 to 14 V → Below 1 V
K21-12 (SW) - Body ground G - Body ground Input Ignition switch ON, brake fluid level not low (brake warning light off) → Brake fluid level low (brake warning light on) 11 to 14 V → Below 1 V
K21-14 (FR) - K21-33 (FE) LG - BE Input Ignition switch ON, fuel level full → low (fuel level warning light on) Pulse generation (See waveform 2)
K21-15 (FV) - Body ground GR - Body ground Input Ignition switch ON Pulse generation (See waveform 3)
K21-17 (WLVL) - Body ground*8 LG - Body ground Input Ignition switch ON, washer fluid level not low → Washer fluid level low 11 to 14 V → Below 1 V
K21-18 (RLMT) -Body ground BE - Body ground Output Ignition switch ON, rear seat belt warning light LH off → Rear seat belt warning light LH on 11 to 14 V → Below 1 V
K21-19 (RCMT) -Body ground R - Body ground Output Ignition switch ON, rear seat belt warning light center off → Rear seat belt warning light center on 11 to 14 V → Below 1 V
K21-20 (RRMT) -Body ground G - Body ground Output Ignition switch ON, rear seat belt warning light RH off → Rear seat belt warning light RH on 11 to 14 V → Below 1 V
K21-21 (ES) - Body ground W-B - Body ground - Always Below 1 Ω
K21-22 (ECU) - Body ground*5 BE - Body ground Output
·

Ignition switch ON

·

"OPEN" or "CLOSE" selected on "Rear Sunshade" screen of multi-information display and "OK" switch (steering pad switch assembly) pressed → "OK" switch (steering pad switch assembly) not pressed


Below 1 V → 5.5 V or higher
K21-24 (RLSB) - Body ground SB - Body ground Input Ignition switch ON, rear seat belt LH unfastened → Fastened Below 1 V → 11 to 14 V
K21-25 (RCSB) - Body ground B - Body ground Input Ignition switch ON, rear seat belt center unfastened → Fastened Below 1 V → 11 to 14 V
K21-26 (RRSB) - Body ground LG - Body ground Input Ignition switch ON, rear seat belt RH unfastened → Fastened Below 1 V → 11 to 14 V
K21-27 (OILW) - Body ground W - Body ground Input Ignition switch ON, engine oil level not low → Engine oil level low Below 1 V → 11 to 14 V
K21-28 (MSM+) - Body ground GR - Body ground Input Ignition switch ON, UP, DOWN, RIGHT and LEFT switches on steering pad switch assembly not pushed 4.8 to 5.2 V
K21-29 (MSTI) - Body ground R - Body ground Input Ignition switch ON, OK and BACK switches on steering pad switch assembly not pushed 4.8 to 5.2 V
K21-31 (CANL) W Input/Output - -
K21-32 (CANH) B Input/Output - -
K21-36 (TX+)*2 G Input/Output - -
K21-37 (TX-)*2 W Input/Output - -
K21-39 (IG+) - Body ground LA-GR - Body ground Input Ignition switch off → Ignition switch ON Below 1 V → 11 to 14 V
K21-40 (B) - Body ground LA-B - Body ground Input Always 11 to 14 V
K20-1 (ODO) - Body ground LA-L - Body ground Input Ignition switch ON, ODO/TRIP switch (trip switch) not pushed 4.8 to 5.2 V
K20-2 (TR) - Body ground L - Body ground Input Ignition switch ON, light control rheostat up switch (trip switch) and light control rheostat down switch (trip switch) not pushed 4.8 to 5.2 V
K20-3 (HAZ) - Body ground LA-R - Body ground Input Hazard warning signal switch off → Hazard warning signal switch pushed 11 to 14 V → Below 1 V
K20-5 (SW3) - Body ground LA-B - Body ground - Always Below 1 Ω
K20-7 (LR) - Body ground LA-G - Body ground Output Ignition switch ON, RH turn indicator light off → RH turn indicator light blinking Below 1 V → 11 to 14 V ←→ Below 1 V
K20-8 (B) - Body ground LA-B - Body ground Input Always 11 to 14 V
K20-10 (TRNL) - Body ground BE - Body ground Output Ignition switch ON, LH turn indicator light off → LH turn indicator light blinking Below 1 V → 11 to 14 V ←→ Below 1 V
K20-11 (LL) - Body ground LA-LG - Body ground Output Ignition switch ON, LH turn indicator light off → LH turn indicator light blinking Below 1 V → 11 to 14 V ←→ Below 1 V
K20-13 (TRNR) - Body ground BE - Body ground Output Ignition switch ON, RH turn indicator light off → RH turn indicator light blinking Below 1 V → 11 to 14 V ←→ Below 1 V

*1: for 2GR-FKS

*2: w/ Radio and Display Receiver Assembly

*3: for LHD

*4: for RHD

*5: w/ Rear Sunshade System

*6: w/ Tire Pressure Warning System

*7: w/o Occupant Classification System

*8: w/ Level Warning Switch


E267248N02
2.969,1.198 3.323,1.396 0.354,0.198 10 false GND 1.156,1.625 1.365,1.833 0.208,0.208 10 false A

Waveform 1:

Item Condition
Tester connection
·

K21-5 (SI) - Body ground

·

K21-6 (+S) - Body ground


Tool setting 5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON, wheel being rotated

HINT:

When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.


E400349N01
2.958,0.917 3.396,1.219 0.438,0.302 10 false GND 0.615,0.646 0.771,0.844 0.156,0.198 10 false A 1.823,0.646 1.979,0.844 0.156,0.198 10 false A

Waveform 2:

Item Condition
Tester connection K21-14 (FR) - K21-33 (FE)
Tool setting 2.5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON, fuel level full → Fuel level low (fuel level warning light on)

HINT:
·

(A) varies depending on the fuel level.

·

Ignition switch ON, fuel level full → Fuel level low (fuel level warning light on) (4.1 to 4.6 V → 0.3 to 1.7 V)



E400350N01
2.958,0.896 3.417,1.094 0.458,0.198 10 false GND

Waveform 3:

Item Condition
Tester connection K21-15 (FV) - Body ground
Tool setting 2.5 V/DIV., 20 ms./DIV.
Condition Ignition switch ON

HINT:

Ignition switch ON (4.5 to 5.5 V)