TELEMATICS TRANSCEIVER
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*1: w/ Audio and Visual System *2: w/ Navigation System |
|||
| K156-1 (+B) - K156-20 (E) | Power source (+B) | Ignition switch off | 11 to 14 V |
| K156-20 (E) - Body ground | Ground | Always | Below 1 V |
| K156-18 (SP+) - K156-20 (E) | Sound signal | Sound being output from built-in speaker of communication telematics box | A waveform synchronized with sound signals is output |
| K156-34 (SP-) - K156-20 (E) | Sound signal | Sound being output from built-in speaker of communication telematics box | A waveform synchronized with sound signals is output |
| K156-19 (IG2) - K156-20 (E) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| K156-4 (IND1) - K156-20 (E) | Manual (SOS) switch red indicator illumination signal | For 10 seconds after turning the ignition switch to ON | 1 to 8.5 V |
| Ignition switch off | Below 1 V | ||
| K156-22 (IND2) - K156-20 (E) | Manual (SOS) switch green indicator illumination signal | For 2 seconds after the ignition switch is turned to ON and the manual (SOS) switch indicator (red) has illuminated for 10 seconds. | 1 to 8.5 V |
| Ignition switch off | Below 1 V | ||
| K156-25 (CANP) | CAN communication signal | - | - |
| K156-26 (CANN) | CAN communication signal | - | - |
| K156-14 (MUTE) - K156-20 (E)*1*2 | Mute signal | Emergency call mode | Below 1 V |
| K156-13 (GSW) - K156-20 (E) | Collision detection signal | Ignition switch ON | Pulse generation
(Refer to waveform 1) |
| K156-3 (SIG-) - K156-20 (E) | Ground | Always | Below 1 V |
| K156-21 (SIG1) - K156-20 (E) | Manual (SOS) switch condition signal | Manual (SOS) switch not pressed | 1.3 to 1.9 V |
| Manual (SOS) switch pressed | 0.5 to 0.8 V | ||
| K156-23 (SGND) - K156-20 (E) | Shield ground | Always | Below 1 Ω |
| K156-5 (MCVD) - K156-20 (E) | Telephone microphone assembly power supply | Ignition switch ON | 4 to 6 V |
| Ignition switch off | Below 1 V | ||
| K156-8 (MCMD) - K156-20 (E) | Microphone mode signal | Microphone mode signal | 0.5 V or higher |
| Emergency call mode | 0.5 V or less | ||
| K156-24 (MICV) - K156-20 (E) | Communication telematics box power supply | Ignition switch off | Below 1 V |
| Ignition switch ON | 4 to 6 V | ||
| K156-6 (MCI+) - K156-20 (E) | Microphone voice signal | Voice being input to communication telematics box | A waveform synchronized with microphone voice signal is input |
| K156-7 (MCI-) - K156-20 (E) | Microphone voice signal | Always | Below 1 V |
Oscilloscope waveform:
Waveform 1
| Item | Condition |
|---|---|
| Tester connection | K156-13 (GSW) - K156-20 (E) |
| Tool setting | 5.0 V/DIV, 20 ms./DIV |
| Vehicle condition | Ignition switch ON |
RADIO AND DISPLAY RECEIVER ASSEMBLY
w/o Navigation System: Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>TERMINALS OF ECU
w/ Navigation System: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU