CHECK SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
| *a | Front view of wire harness connector (to Skid Control ECU (Brake Actuator Assembly)) | - | - |
Disconnect the A34 skid control ECU (brake actuator assembly) connector.
Measure the voltage and resistance according to the value (s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A34-30 (+BS) - Body ground | G - Body ground | Parking brake motor power supply | Always | 11 to 14 V |
| A34-36 (IG1) - Body ground | B - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| A34-46 (GND1) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| A34-14 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| A34-2 (MRR+) - Body ground | Y - Body ground | Parking brake motor RH (parking brake actuator assembly RH) (+) | - | - |
| A34-3 (MRR-) - Body ground | L - Body ground | Parking brake motor RH (parking brake actuator assembly RH) (-) | - | - |
| A34-13 (MRL+) - Body ground | G - Body ground | Parking brake motor LH (parking brake actuator assembly LH) (+) | - | - |
| A34-12 (MRL-) - Body ground | W - Body ground | Parking brake motor LH (parking brake actuator assembly LH) (-) | - | - |
| A34-35 (POL) - Body ground | L - Body ground | Electric parking brake switch indicator light | - | - |
| A34-31 (SWI1) - Body ground | P - Body ground | Electric parking brake switch | - | - |
| A34-32 (SWO1) - Body ground | SB - Body ground | Electric parking brake switch | - | - |
| A34-15 (SWI2) - Body ground | W - Body ground | Electric parking brake switch | - | - |
| A34-16 (SWO2) - Body ground | V - Body ground | Electric parking brake switch | - | - |
| A34-5 (CANH) - Body ground | Y - Body ground | CAN communication line H | - | - |
| A34-19 (CANL) - Body ground | W - Body ground | CAN communication line L | - | - |