Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM › from 2021.02
RM33A0E _54 Brake _065369 PARKING BRAKE _0328504 ELECTRIC PARKING BRAKE SYSTEM J

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  Message Not Displayed on Combination Meter When AUTO Function Set to ON/OFF  


DESCRIPTION

When the AUTO function is set to ON/OFF, a message is displayed on the combination meter assembly.

WIRING DIAGRAM

C403409E26
1.177,0.948 4.5,1.385 3.323,0.438 10 false Skid Control ECU (Brake Actuator Assembly) 1.177,2.906 4.5,3.344 3.323,0.438 10 false Combination Meter Assembly 0.854,4.156 4.177,4.594 3.323,0.438 10 false : CAN Communication Line

PROCEDURE

1.CHECK OPERATION OF AUTO FUNCTION
a.

Check that the AUTO function operates when the operating conditions are met.

HINT:

Do not use the combination meter assembly to determine whether the AUTO function is operating or not.



Result:
Result Proceed to
The AUTO function operates A
The AUTO function does not operate B



A

REPLACE COMBINATION METER ASSEMBLY

B

GO TO Electric Parking Brake System AUTO Function Circuit