The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during digital audio broadcasting antenna assembly removal/installation are shown below.
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION
1.REMOVE ROOF HEADLINING ASSEMBLY
863C0
2.REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY
Do not touch the contact points.
Disconnect the connector.
Remove the nut.
Disengage the guide to remove the digital audio broadcasting antenna assembly.