Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
76622C
1.REMOVE FRONT FENDER MUDGUARD (w/ Mudguard)
75862Q
2.REMOVE FRONT ROCKER PANEL MOULDING END COVER
75852
3.REMOVE ROCKER PANEL MOULDING
Apply protective tape around the rocker panel moulding and doors as shown in the illustration.
|
Protective Tape | - | - |
Remove the 8 clips.
Remove the 6 screws.
| *1 | Grommet | - | - |
Remove the grommet
Disengage the 9 clips to remove the rocker panel moulding as shown in the illustration.
|
Remove in this Direction | - | - |