Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › from 2021.08
RM33A0E _52 Drivetrain _065352 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0322782 AUTOMATIC TRANSAXLE SYSTEM U

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


C370678N01
5.5,0.25 5.917,0.5 0.417,0.25 3.833,0.25 4.25,0.5 0.417,0.25 1.75,0.25 2.167,0.5 0.417,0.25 5.594,0.292 6.052,0.49 0.458,0.198 10 false A24 3.917,0.292 4.375,0.49 0.458,0.198 10 false C59 1.833,0.292 2.292,0.49 0.458,0.198 10 false C57

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/ Shift Paddle Switch

*2: w/ Pattern Select Switch

*3: except Alternator 150 A Type

*4: for Alternator 150 A Type

A24-1 (BATT) - A24-10 (E1) G - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
A24-8 (CANH) - A24-10 (E1) B - W-B CAN communication line Ignition switch ON Pulse generation
A24-9 (+B) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V
A24-10 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
A24-12 (PWMS) - A24-10 (E1)*2 LG - W-B Combination switch (SPORT) signal Ignition switch ON and combination switch (SPORT) being pushed and held Below 1.5 V
Ignition switch ON and combination switch (SPORT) not pushed 11 to 14 V
A24-13 (SPCN) - A24-10 (E1)*2 V - W-B Combination switch (NORMAL) signal Ignition switch ON and combination switch (NORMAL) being pushed and held Below 1.5 V
Ignition switch ON and combination switch (NORMAL) not pushed 11 to 14 V
A24-14 (S) - A24-10 (E1) GR - W-B S shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever not in S Below 1 V
A24-18 (CANL) - A24-10 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
A24-19 (SFTD) - A24-10 (E1) W - W-B Down-shift switch signal Ignition switch ON 11 to 14 V
Ignition switch ON and shift lever held in "-" (Down shift) Below 1 V
A24-19 (SFTD) - A24-28 (ECCS)*1 W - BE Down-shift switch signal Ignition switch ON 11 to 14 V
Ignition switch ON and "-" (Down shift) shift paddle switch operated Below 1 V
A24-20 (SFTU) - A24-10 (E1) G - W-B Up-shift switch signal Ignition switch ON 11 to 14 V
Ignition switch ON and shift lever held in "+" (Up shift) Below 1 V
A24-20 (SFTU) - A24-28 (ECCS)*1 G - BE Up-shift switch signal Ignition switch ON 11 to 14 V
Ignition switch ON and "+" (Up shift) shift paddle switch operated Below 1 V
A24-21 (STP) - A24-10 (E1) SB - W-B Stop light switch signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1 V
A24-23 (NSW) - A24-10 (E1) BE - W-B Park/neutral position switch signal Ignition switch ON and shift lever in P or N Below 1 V
Ignition switch ON and shift lever not in P or N 11 to 14 V
A24-30 (STA) - A24-10 (E1) G - W-B Starter signal Cranking (shift lever in P or N, ignition switch START) 11 to 14 V
Ignition switch ON and shift lever in P or N Below 2 V
A24-35 (+B2) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V
A24-42 (SPD) - A24-10 (E1) L - W-B Vehicle speed signal from combination meter assembly Driving at 20 km/h (12 mph) Pulse generation
C59-2 (SL6+) - C59-1 (SL6-) B - L Solenoid (SL6) valve signal 1st or Reverse gear selected Pulse generation
C59-4 (SL3+) - C59-3 (SL3-) G - R*3
LG - SB*4
Solenoid (SL3) valve signal 3rd, 7th or Reverse gear selected Pulse generation
C59-6 (SL2+) - C59-5 (SL2-) R - GR Solenoid (SL2) valve signal 5th, 6th, 7th or 8th gear selected Pulse generation
C59-8 (SL1+) - C59-7 (SL1-) LG - L Solenoid (SL1) valve signal 1st, 2nd, 3rd, 4th or 5th gear selected Pulse generation
C59-10 (SLT+) - C59-9 (SLT-) GR - LG*3
GR - W*4
Solenoid (SLT) valve signal Engine idling Pulse generation
C59-12 (SLU+) - C59-11 (SLU-) LG - V Solenoid (SLU) valve signal Lock-up ON Pulse generation
C59-14 (SL5+) - C59-13 (SL5-) V - P*3
W - B*4
Solenoid (SL5) valve signal 2nd or 8th gear selected Pulse generation
C59-16 (SL4+) - C59-15 (SL4-) G - B Solenoid (SL4) valve signal 4th or 6th gear selected Pulse generation
C59-19 (SL) - A24-10 (E1) P - W-B Solenoid (SL) valve signal
·

Shift lever in P, R or N

·

Lock-up OFF (shift lever in D)


11 to 14 V
C59-23 (D) - A24-10 (E1) R - W-B D shift position switch signal Ignition switch ON and shift lever in D or S 11 to 14 V
Ignition switch ON and shift lever not in D or S Below 1 V
C59-24 (N) - A24-10 (E1) LG - W-B N shift position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
C59-25 (R) - A24-10 (E1) W - W-B R shift position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
C59-26 (P) - A24-10 (E1) B - W-B P shift position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
C59-33 (NCB) - A24-10 (E1) B - W-B Power source for sensor
(specific voltage)
Ignition switch ON 11 to 14 V
C59-34 (NCO) - A24-10 (E1) V - W-B Transmission Revolution Sensor (NC) signal Vehicle being driven Pulse generation
C59-35 (NTB) - A24-10 (E1) R - W-B Power source for sensor
(specific voltage)
Ignition switch ON 11 to 14 V
C59-36 (NTO) - A24-10 (E1) G - W-B Transmission Revolution Sensor (NT) signal Engine idling (shift lever in P or N) Pulse generation
C59-46 (THO1) - C59-45 (ETHO) LG - L ATF temperature sensor signal ATF temperature 115°C (239°F) or higher Below 1.5 V