Home › Vehicle Exterior › BODY PANEL › FRONT FENDER FRONT APRON
BM33C0E _01 Vehicle Exterior _068296 BODY PANEL _0332816 FRONT FENDER FRONT APRON F

BODY PANEL  FRONT FENDER FRONT APRON  CUT AND JOIN REPLACEMENT SECTIONS  


K140646

With the radiator upper side support assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

K140370C01
1.885,2.229 2.198,2.385 0.313,0.156 10 false *a
*a 130 mm (5.12 in.) - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K140371C01
1,1.375 0.854,0.906 0.854,0.906 0.719,0.906 false 1.656,0.99 1.25,0.24 1.25,0.24 1.094,0.24 false 1.51,1.583 2.115,2.406 2.115,2.406 2.25,2.406 false 0.573,0.823 0.885,0.979 0.313,0.156 10 false *1 0.927,0.156 1.24,0.313 0.313,0.156 10 false *2 2.281,2.323 2.594,2.479 0.313,0.156 10 false *3
*1 FENDER SIDE APRON SUB-ASSEMBLY *2 FRONT APRON TO COWL SIDE MEMBER LOWER FRONT
*3 FRONT FENDER APRON GUSSET UPPER - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.