Home › Vehicle Exterior › BODY PANEL › NAME PLATE › 2017.09–2020.08
BM33C0E _01 Vehicle Exterior _068296 BODY PANEL _0332841 NAME PLATE F

BODY PANEL  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



B490254C01
1.177,3.823 6.302,4.792 5.125,0.969 2.375,0.24 3.365,0.24 3.365,0.24 3.635,0.813 true 2.708,2.969 3.104,2.969 false 1.958,1.292 2.938,1.292 true 2.031,0.99 3.323,0.99 true 4.365,1.313 5.198,1.313 true 3.677,5.073 3.677,4.792 false 1.75,6.198 1.75,5.917 false 5.375,6.188 5.375,5.906 false 2.406,2.854 3.031,3.354 0.625,0.5 10 false ●*1 5.375,6.177 5.844,6.552 0.469,0.375 10 false ●*2 3.698,5.052 4.396,5.531 0.698,0.479 10 false ●*3 1.781,6.208 2.365,6.74 0.583,0.531 10 false ●*4 2.042,0.156 2.625,0.531 0.583,0.375 10 false <A> 1.719,0.906 2.302,1.281 0.583,0.375 10 false <B> 1.646,1.198 2.229,1.573 0.583,0.375 10 false <C> 5.25,1.219 5.833,1.594 0.583,0.375 10 false <D> 2.094,2.865 2.677,3.24 0.583,0.375 10 false <A> 3.385,5.063 3.969,5.438 0.583,0.375 10 false <B> 1.479,6.219 2.063,6.594 0.583,0.375 10 false <C> 5.063,6.188 5.646,6.563 0.583,0.375 10 false <D>
*1 LUGGAGE COMPARTMENT DOOR EMBLEM *2 NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE
*3 NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE *4 NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
● Non-reusable part - -


B485352C01
1.875,2.052 1.875,1.229 true 5.302,2.052 5.302,1.229 true 1.906,3.302 1.906,3.125 false 4.917,3.313 4.917,3.135 false 0.25,0.177 0.635,0.49 0.385,0.313 12 false *A 4.01,0.177 4.51,0.542 0.5,0.365 12 false *B 1.917,3.281 2.375,3.656 0.458,0.375 10 false ●*1 1.76,2.063 2.281,2.458 0.521,0.396 10 false <A> 5.188,2.052 5.708,2.448 0.521,0.396 10 false <B> 1.615,3.281 2.135,3.677 0.521,0.396 10 false <A> 4.656,3.302 5.177,3.698 0.521,0.396 10 false <B> 4.938,3.292 5.396,3.667 0.458,0.375 10 false ●*1
*A for LH Side *B for RH Side
*1 SIDE PANEL EMBLEM - -
● Non-reusable part - -


INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM


B485354


INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


B485353


INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE


B481983C01
5.625,2.292 5.625,1.958 true 5.563,2.281 5.781,2.469 0.219,0.188 10 true *a 3.948,1.75 4.135,1.958 0.188,0.208 10 false A 6.031,1.063 6.219,1.271 0.188,0.208 10 true B 6.635,1.656 6.823,1.865 0.188,0.208 10 true C
*a Profile of Luggage Compartment Door Panel - -


Standard Measurement:
Area Measurement Area Measurement
A 24.4 mm (0.961 in.) B 12.4 mm (0.488 in.)
C 7.9 mm (0.311 in.) - -



INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE


B490258C01
1.583,2.125 1.583,1.792 true 1.521,2.115 1.781,2.438 0.26,0.323 10 false *a 0.698,1.563 0.958,1.844 0.26,0.281 10 false A 1.083,0.969 1.333,1.229 0.25,0.26 10 false B 3.052,1.646 3.344,2.01 0.292,0.365 10 false C
*a Profile of Luggage Compartment Door Panel - -


Standard Measurement:
Area Measurement Area Measurement
A 8.7 mm (0.343 in.) B 13.9 mm (0.547 in.)
C 24.1 mm (0.949 in.) - -



INSTALL SIDE PANEL EMBLEM


for LH Side:

B485358C01
2.302,2.021 2.677,2.021 false 2.688,1.906 3.063,2.188 0.375,0.281 10 false *a 0.708,1.76 0.948,2.01 0.24,0.25 10 false A 2.167,0.844 2.406,1.094 0.24,0.25 10 false B 2.177,1.708 2.417,1.958 0.24,0.25 10 false C
*a Profile of Side Panel - -


Standard Measurement:
Area Measurement Area Measurement
A 153.7 mm (6.05 in.) B 32.2 mm (1.27 in.)
C 30.9 mm (1.22 in.) - -


for RH Side:

B485359C01
4.542,1.896 4.906,1.896 false 4.344,1.802 4.708,2.104 0.365,0.302 10 false *a 4.958,0.375 5.229,0.625 0.271,0.25 10 false A 4.969,1.625 5.24,1.875 0.271,0.25 10 false B 6,2 6.271,2.25 0.271,0.25 10 false C
*a Profile of Side Panel - -


Standard Measurement:
Area Measurement Area Measurement
A 32.2 mm (1.27 in.) B 30.9 mm (1.22 in.)
C 153.8 mm (6.06 in.) - -