After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Make sure the caution label is not attached over a spot weld.
When attaching the caution label, make sure not to touch the label's adhesive surface.
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
Please attach caution labels that matches the specifications of the vehicle.
| *1 | BATTERY CAUTION LABEL | *2 | COOLER SERVICE CAUTION LABEL |
| *3 | ENGINE CAUTION LABEL | *4 | CHILD PROTECTOR INFORMATION LABEL |
| *A | for LHD with Passenger Side Knee Airbag | - | - |
| *1 | VEHICLE INFORMATION LABEL | *2 | NAME LABEL |
| *3 | TIRE PRESSURE INFORMATION LABEL | - | - |
| *A | for LHD without Passenger Side Knee Airbag | - | - |
| *1 | NAME LABEL | *2 | CR LABEL |
| *3 | TIRE PRESSURE INFORMATION LABEL | *4 | FUEL INFORMATION LABEL |
| *A | for RHD | - | - |
| *1 | NAME LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *3 | FUEL INFORMATION LABEL | - | - |