PLASTIC PROPERTIES CHART
When repairing, some parts may be deformed by the heat. Therefore, confirm the properties of the plastic parts, and remove parts beforehand as necessary.
| Code | Material Name | Heat Resistant Temperature Limit* °C (°F) | Resistance to Alcohol or Gasoline | Notes |
|---|---|---|---|---|
| AAS | Acrylonitrile Acrylic Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ABS | Acrylonitrile Butadiene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| AES | Acrylonitrile Ethylene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ASA | Acrylonitrile Styrene Acrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| CAB | Cellulose Acetate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| CFRP | Carbon Fiber Reinforced Plastic | 200 (392) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid battery acid. |
| EPDM | Ethylene Propylene | 100 (212) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| EVA | Ethylene Acetate | 70 (158) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| E/VAC | Ethylene/ Vinyl Acetate Copolymer Resin | 70 (158) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| FRP | Fiber Reinforced Plastics | 180 (356) | Alcohol and gasoline are harmless. | Avoid alkali. |
| PA | Polyamide (Nylon) | 80 (176) | Alcohol and gasoline are harmless. | Avoid battery acid. |
| PBT | Polybutylene Terephthalate | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PC | Polycarbonate | 120 (248) | Alcohol is harmless. | Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali. |
| PE | Polyethylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PEI | Polyetherimide | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PET | Polyethylene Terephthalate | 75 (167) | Alcohol and gasoline are harmless. | Avoid dipping in water. |
| PGM | Polypropylene Glass Fiber Pulp | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PMMA | Polymethyl Methacrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| POM | Polyoxymethylene (Polyacetal) | 100 (212) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PP | Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPC | Polyphthlate Carbonate | 149 (300) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPE | Polyphenylene Ether | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PPF | Composite Reinforced Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPO | Modified Polyphenylene Oxide | 100 (212) | Alcohol is harmless. | Gasoline is harmless if applied only for quick wiping to remove grease. |
| PS | Polystyrene | 60 (140) | Alcohol and gasoline are harmless if applied only for short time in small amounts. | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PUR | Polyurethane | 80 (176) | Alcohol is harmless if applied only for very short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PVC | Polyvinylchloride (Vinyl) | 80 (176) | Alcohol and gasoline are harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| SAN | Styrene Acrylonitrile | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| SAS | Silicon Acrylonitrile Styrene | 80(176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) | Avoid gasoline and organic or aromatic solvents. |
| G-SMC | Sheet Molding Compound | 220 (428) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| TPE | Thermoplastic Elastomer | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPO | Thermoplastic Olefine | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPU | Thermoplastic Polyurethane | 80 (176) | Alcohol is harmless if applied only for short time in small amounts.
(e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TSOP | TOYOTA Super Olefine Polymer | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| UP | Unsaturated Polyester | 110 (233) | Alcohol and gasoline are harmless. | Avoid alkali. |
*The heat resistant temperature means a temperature that may cause heat deformation during a procedure.
THE PLASTIC BODY PARTS MATERIAL LIST
| *A | for Standard | - | - |
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Side Moulding (ABS) |
| *3 | Front Fog Light (PC) | *4 | Radiator Lower Side Grille (TSOP) |
| *5 | Radiator Lower Grille (TSOP) | *6 | Emblem (ABS/PC/AES, PC/AES) |
| *7 | Front Bumper Center Bar (TSOP) | *8 | Radiator Grille (ASA) |
| *9 | Headlight Washer Cover (ABS) | *10 | Headlight (PC/PP) |
| *11 | Cowl Top Ventilator Louver (TSOP) | *12 | Front Door Front Frame Upper Cover (ASA) |
| *13 | Outer Rear View Mirror (ASA/ABS) | *14 | Roof Side Moulding (TPO) |
| *15 | Rocker Panel Moulding (TSOP) | *16 | Side Turn Signal Light (PMMA/ABS) |
| *17 | Side Panel Emblem (ABS) | *18 | Door Window Frame Moulding (ASA) |
| *19 | Antenna Outer Cover (PC/ABS) | *20 | Rear Combination Light (PMMA/ASA) |
| *21 | Rear Light (PMMA/ASA) | *22 | Emblem (PC/ABS) |
| *23 | Luggage Compartment Door Outside Garnish (ABS/ASA) | *24 | Emblem (ABS) |
| *25 | Rear Bumper (TSOP) | *26 | License Plate Light (PMMA/ABS) |
| *27 | Rear Bumper Lower Cover (TSOP) | *28 | Emblem (ABS) |
| *29 | Reflex Reflector (PMMA/ASA) | *30 | Door Outside Handle (PC/PBT/PA) |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
| *A | for Sport Package | - | - |
| *1 | Front Bumper (TSOP) | *2 | Front Fog Light (PC) |
| *3 | Radiator Grille Lower Side Moulding (ASA, ABS) | *4 | Front Fog Light Cover (ASA) |
| *5 | Front Bumper Hole Cover (ASA) | *6 | Radiator Grille Lower Moulding (ASA, ABS) |
| *7 | Radiator Lower Grille (TSOP) | *8 | Emblem (PC/AES) |
| *9 | Radiator Grille (ASA) | *10 | Front Bumper Side Moulding (ASA) |
| *11 | Headlight (PC/PP) | *12 | Cowl Top Ventilator Louver (TSOP) |
| *13 | Front Door Front Frame Upper Cover (ASA) | *14 | Outer Rear View Mirror (ASA/ABS) |
| *15 | Roof Side Moulding (TPO) | *16 | Rocker Panel Moulding (TSOP) |
| *17 | Side Turn Signal Light (PMMA/ABS) | *18 | Side Panel Emblem (ABS) |
| *19 | Door Window Frame Moulding (ASA) | *20 | Antenna Outer Cover (PC/ABS) |
| *21 | Rear Combination Light (PMMA/ASA) | *22 | Rear Light (PMMA/ASA) |
| *23 | Rear Spoiler (ABS) | *24 | Emblem (PC/ABS) |
| *25 | Luggage Compartment Door Outside Garnish (ABS/ASA) | *26 | Emblem (ABS) |
| *27 | License Plate Light (PMMA/ABS) | *28 | Rear Bumper (TSOP) |
| *29 | Rear Bumper Extension Moulding (ASA) | *30 | Emblem (ABS) |
| *31 | Reflex Reflector (PMMA/ASA) | *32 | Rear Bumper Corner Extension (ASA) |
| *33 | Door Outside Handle (PC/PBT/PA) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
| *A | for Panoramic Moon Roof | - | - |
| *1 | Slide Roof Panel (PC/PET) | *2 | Sliding Roof Side Garnish (PC/PET) |
| *3 | Slide Roof Panel (PC/PET) | - | - |
/ Made up of 2 or more kinds of materials.