Home › Engine / Hybrid System › A25A-FXS (ENGINE MECHANICAL) › ENGINE UNIT
NM33C0E _51 Engine / Hybrid System _067342 A25A-FXS ENGINE MECHANICAL _0328458 ENGINE UNIT DE DETAILS F

A25A-FXS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

A tapered design is used for the small end of the connecting rod to reduce weight.


d.

Resin coated aluminum connecting rod bearings are used for the connecting rod bearings.


e.

Lead-free materials have been used for the connecting rod sub-assembly, small end bushing and connecting rod bearing in consideration of environmental issues.

W135832C01
0.76,2.427 1.167,2.427 true 0.802,1.052 1.552,1.052 true 1.917,2.208 2.323,2.208 true 5.969,1.594 6.375,1.594 true 0.625,0.969 0.938,1.125 0.313,0.156 10 false *1 0.583,2.344 0.896,2.5 0.313,0.156 10 false *2 6.417,1.5 6.729,1.656 0.313,0.156 10 false *3 2.375,2.115 2.688,2.271 0.313,0.156 10 false *a
*1 Connecting Rod Sub-assembly *2 Plastic Region Tightening Bolt
*3 Connecting Rod Bearing - -
*a Knock Pin - -
V100145

Resin Coating - -