FUNCTION
A fuel returnless system is used to reduce evaporative emissions. As shown below, by integrating the fuel sub tank sub-assembly, fuel main valve assembly and fuel pump (for low pressure side), it is possible to discontinue the return of fuel from the engine area, thus preventing temperature rise inside the fuel tank assembly. This reduces the generation of evaporative emissions in the fuel tank assembly.
| *1 | Fuel Delivery Pipe (for High Pressure Side) | *2 | Direct Fuel Injector Assembly |
| *3 | Port Fuel Injector Assembly | *4 | Fuel Delivery Pipe with Sensor Sub-assembly (for Low Pressure Side) |
| *5 | Fuel Pump Assembly (for High Pressure Side) | *6 | Fuel Tank Assembly |
| *7 | Fuel Main Valve Assembly | *8 | Fuel Pump (for Low Pressure Side) |
| *9 | Fuel Filter | - | - |