FUNCTION
The combination meter assembly is equipped with various warning lights and indicator lights and a multi-information display and buzzer.
| *a | Slip Indicator Light | *b | VSC OFF Indicator Light |
| *c | Brake Warning Light / Yellow (Minor Malfunction) | *d | ABS Warning Light |
| *e | Brake Warning Light / Red (Malfunction) | *f | Master Warning Light |
| *g | Multi-information Display | *h | Brake Hold Standby Indicator Light |
| *i | Brake Hold Operated Indicator Light | - | - |
| Brake Warning Light / Red (Malfunction) | ·
Illuminates to warn the driver when a malfunction that may affect braking performance is detected in the brake system. ·
Illuminates to warn the driver when the skid control ECU detects a malfunction in the ABS system or EBD function (the ABS warning light illuminates simultaneously). ·
Illuminates to warn the driver when the brake fluid level is low. |
| Brake Warning Light / Yellow (Minor Malfunction) | ·
Illuminates to inform the driver when a minor malfunction that will not interfere with the brake control system is detected. ·
Blinks to indicate Diagnostic Trouble Codes (DTC) when the system is in diagnosis mode. |
| ABS Warning Light | ·
Illuminates to warn the driver when the skid control ECU detects a malfunction in the ABS system or brake assist function. ·
Blinks to indicate Diagnostic Trouble Codes (DTC) when the system is in diagnosis mode. |
| Slip Indicator Light | ·
Blinks to inform the driver when the VSC, TRC or ABS system is operating. ·
Illuminates to warn the driver when the skid control ECU detects a malfunction in the VSC or TRC system. ·
Blinks to indicate Diagnostic Trouble Codes (DTC) when the system is in diagnosis mode. |
| VSC OFF Indicator Light | Illuminates to inform the driver when VSC OFF mode is selected. |
| Brake Hold Standby Indicator Light | Illuminates to inform the driver that the brake hold standby condition has been established. |
| Brake Hold Operated Indicator Light | ·
Illuminates to inform the driver that the brake hold function is operating. ·
Blinks to alert the driver when the skid control ECU detects a malfunction in the brake hold function. |
| Multi-information Display | ·
Displays a message when TRC OFF mode is selected. ·
Displays a warning message when a malfunction is detected in the brake control system. |
| Master Warning Light | Illuminates to warn the driver when a malfunction is detected in the brake control system (a warning message is displayed on the multi-information display simultaneously). |
Sounds to warn the driver according to the warning message displayed on the multi-information display.