Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › 2017.09–2021.02
NM33C0E _59 Vehicle Exterior _068189 EXTERIOR PANELS / TRIM _0334008 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SAFETY FEATURES  


CONSTRUCTION


a.

Impact Absorbing Structure for Frontal Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a frontal collision has been achieved.

·

The front crash box and front side member sub-assembly absorb and disperse collision energy received from the front bumper reinforcement.

·

Collision energy applied to the front side member sub-assembly is transmitted to the front apron to cowl side member sub-assembly and cowl under section.

·

The front lower side member and lower side members absorb and disperse collision energy received from the radiator support lower cross member.

·

Collision energy applied to the lower side members is transmitted to the front suspension cross member and floor panel.

Y214470C01
1,1.667 1,0.583 1,0.583 1.167,0.583 true 2,1.917 2,0.833 2,0.833 2.167,0.833 true 4.333,2.25 4.333,1.167 4.333,1.167 4.5,1.167 true 4.917,2.25 4.917,1.333 4.917,1.333 5.083,1.333 true 5.917,2.25 5.917,1.083 5.917,1.083 6.083,1.083 true 4.083,3.25 4.083,2.917 4.083,2.917 4.417,2.833 true 6.167,3.417 6.167,3.25 6.167,3.25 5.917,3 true 4.906,3.313 4.906,2.896 true 1.188,0.51 1.5,0.667 0.313,0.156 10 false *1 2.219,0.771 2.531,0.927 0.313,0.156 10 false *2 5.125,1.281 5.438,1.438 0.313,0.156 10 false *3 4.01,3.302 4.323,3.458 0.313,0.156 10 false *4 4.833,3.333 5.146,3.49 0.313,0.156 10 false *5 6.094,3.448 6.406,3.604 0.313,0.156 10 false *6 1.875,3.573 2.188,3.729 0.313,0.156 10 false *a 5.531,3.583 5.781,3.74 0.25,0.156 10 false *b 4.552,1.125 4.865,1.281 0.313,0.156 10 false *1 6.125,1.021 6.438,1.177 0.313,0.156 10 false *2
*1 Front Bumper Reinforcement *2 Front Side Member Sub-assembly
*3 Front Crash Box *4 Radiator Support Lower Cross Member
*5 Front Lower Side Member *6 Front Suspension Cross Member
*a Upper View *b Side View
V100136

Front Impact Energy
V100135

Dissipate


·

Front body pillars have been strengthened to optimize dispersal of collision energy to the rail panel, rocker panel and floor panel.

·

Collision energy applied to the front body pillar transmitted to the suspension tower brace, cowl panel and instrument panel reinforcement circular structure via the instrument panel reinforcement cowl side bracket.

Y217930C01
3.99,1.615 3.99,0.448 3.99,0.448 4.156,0.448 true 2.583,3.75 2.583,3.417 2.583,3.417 3.25,2.833 true 5.167,3.75 5.167,3.417 5.167,3.417 4.417,2.833 true 2.135,5.281 2.135,4.448 2.135,4.448 2.302,4.448 true 2.75,5.333 3.333,4.667 3.333,4.667 3.5,4.667 true 2.5,5.25 3.083,4.333 3.083,4.333 3.25,4.333 true 2.51,3.771 2.823,3.927 0.313,0.156 10 false *1 4.188,0.375 4.5,0.531 0.313,0.156 10 false *2 5.094,3.792 5.406,3.948 0.313,0.156 10 false *3 2.344,4.396 2.656,4.552 0.313,0.156 10 false *4 3.292,4.26 3.604,4.417 0.313,0.156 10 false *5 3.542,4.604 3.854,4.76 0.313,0.156 10 false *6
*1 Front Body Pillar *2 Rail Panel
*3 Rocker Panel *4 Suspension Tower Brace
*5 Cowl Panel *6 Instrument Panel Reinforcement
V100136

Front Impact Energy
V100135

Dissipate


·

Hot-stamped sheet steel is used for the dash panel cross member.

·

Ultra high-tensile strength sheet steel are used for the rocker panel reinforcement and floor member. high-tensile strength sheet steel is used for floor tunnel panel.

·

Collision energy applied to the dash panel cross member transmitted to the rocker panel, floor member and floor tunnel.

Y214471C01
2.833,0.917 3.25,0.25 3.25,0.25 3.667,0.25 true 3.917,2.5 4.5,0.75 4.5,0.75 4.917,0.75 true 5.167,2.5 5.583,1.5 5.583,1.5 6,1.5 true 4.833,3.167 6,1.833 6,1.833 6.417,1.833 true 1.833,3.417 1.833,3.167 1.833,3.167 3.333,2.833 true 3.708,0.188 4.021,0.344 0.313,0.156 10 false *1 4.969,0.698 5.281,0.854 0.313,0.156 10 false *2 6.042,1.427 6.354,1.583 0.313,0.156 10 false *3 6.448,1.729 6.76,1.885 0.313,0.156 10 false *4 1.771,3.458 2.083,3.615 0.313,0.156 10 false *5
*1 Front Side Member Sub-assembly *2 Dash Panel Cross Member
*3 Rocker Panel *4 Floor Member
*5 Floor Tunnel - -
V100135

Dissipate - -





b.

Impact Absorbing Structure for Side Collision

i.

A structure that ensures collision energy absorption efficiency, dissipates impact and minimizes cabin deformation during a side collision has been achieved.

·

Hot-stamped sheet steel are used for the rail outer reinforcement, center pillar outer reinforcement, center pillar hinge reinforcement and roof gusset.

·

High-tensile strength sheet steel is used for the roof cross reinforcement CTR and front body pillar outer reinforcement.

·

A structure which uses the floor side member reinforcement and rocker inner side panel to efficiently transmit impact load during a side collision to the floor is used.

·

A structure which optimizes the placement of the rear door protection beam and rocker panel reinforcement to efficiently transmit impact load is used.

Y217106C01
4.167,3.5 4.167,3.25 4.167,3.25 3.917,3 true 4.219,1.219 4.635,0.219 4.635,0.219 4.885,0.219 true 4.333,1.75 5.75,0.583 5.75,0.583 6,0.583 true 2.417,3.5 2.417,3.25 2.417,3.25 3,2.5 true 0.583,6 0.583,5.75 0.583,5.75 1,5.5 true 1.333,5.76 1.333,5.344 1.333,5.344 1.5,5.344 true 1.625,5.885 1.625,6.135 1.625,6.135 1.792,6.135 true 3.917,5.75 3.917,5.083 3.917,5.083 4.083,5.083 true 4.083,5.792 4.083,6.125 4.083,6.125 4.25,6.125 true 6.25,5 6.25,4.333 6.25,4.333 6.417,4.333 true 4.927,0.167 5.24,0.323 0.313,0.156 10 false *1 6.021,0.531 6.333,0.688 0.313,0.156 10 false *2 2.313,3.51 2.625,3.667 0.313,0.156 10 false *3 4.073,3.521 4.385,3.677 0.313,0.156 10 false *4 0.49,6.021 0.802,6.177 0.313,0.156 10 false *5 1.51,5.292 1.823,5.448 0.313,0.156 10 false *6 1.844,6.073 2.156,6.229 0.313,0.156 10 false *7 4.125,5.021 4.438,5.177 0.313,0.156 10 false *8 4.271,6.083 4.583,6.24 0.313,0.156 10 false *9 6.469,4.271 6.938,4.427 0.469,0.156 10 false *10 0.125,4.104 0.438,4.26 0.313,0.156 10 false *a 2.823,4.063 3.135,4.219 0.313,0.156 10 false *b 5.51,4.052 5.823,4.208 0.313,0.156 10 false *c 4.042,2.75 4.198,2.948 0.156,0.198 10 true A 4.521,2.646 4.677,2.844 0.156,0.198 10 true A 2.958,0.531 3.115,0.729 0.156,0.198 10 true B 3.313,0.406 3.469,0.604 0.156,0.198 10 true B 3.927,0.448 4.083,0.646 0.156,0.198 10 true C 3.938,0.76 4.094,0.958 0.156,0.198 10 true C
*1 Roof Cross Reinforcement CTR *2 Center Pillar
*3 Front Body Pillar *4 Rocker Panel
*5 Center Pillar Hinge Reinforcement *6 Center Pillar Outer Reinforcement Lower
*7 Center Pillar Outer Reinforcement *8 Roof Cross Reinforcement Lower
*9 Roof Gusset *10 Rail Outer Reinforcement
*a A - A Cross Section *b B - B Cross Section
*c C - C Cross Section - -
V100136

Side Impact Energy
V100135

Dissipate


·

Ultra high-tensile strength sheet steel are used for front door protection beam and rear door protection beam.

·

High-tensile strength sheet steel are used for the front door beltline reinforcement and rear door reinforcement.

Y212598C01
2,1.75 2.167,1.333 2.167,1.333 2.417,1.333 true 3.26,2.875 3.427,2.458 3.427,2.458 3.677,2.458 true 6.25,2.25 6.5,2.5 6.5,2.5 6.667,2.5 true 5.75,3 6.167,2.833 6.167,2.833 6.333,2.833 true 1.979,3.438 2.292,3.594 0.313,0.156 10 false *A 5.021,3.49 5.333,3.646 0.313,0.156 10 false *B 2.458,1.281 2.771,1.438 0.313,0.156 10 false *1 3.729,2.396 4.042,2.552 0.313,0.156 10 false *2 6.698,2.427 7.01,2.583 0.313,0.156 10 false *3 6.375,2.771 6.688,2.927 0.313,0.156 10 false *4
*A Front Door *B Rear Door
*1 Front Door Beltline Reinforcement
(High-tensile Strength Sheet Steel)
*2 Front Door Protection Beam
(Ultra High-tensile Strength Sheet Steel)
*3 Rear Door Reinforcement
(High-tensile Strength Sheet Steel)
*4 Rear Door Protection Beam
(Ultra High-tensile Strength Sheet Steel)


·

High-tensile strength sheet steel are used for the seat cross member No. 1, seat cross member No. 2 and floor cross member CTR.

·

A bulk is provided on the tunnel of floor panel. In the event of a side collision, the center body pillar strikes the seat side, absorbing the impact by transmitting it to the floor tunnel.

Y217107E01
1.313,3.823 5.792,7.781 4.479,3.958 3.917,1.083 4.583,0.25 4.583,0.25 4.833,0.25 true 1.979,3.604 1.979,3.354 1.979,3.354 2.646,2.854 true 4.417,3.51 4.417,3.26 4.417,3.26 3.833,2.677 true 5.531,3.573 5.531,3.323 5.531,3.323 5.031,2.74 true 2.323,6.865 2.323,5.115 2.323,5.115 2.49,5.115 true 2.917,4.25 3,4 3,4 3.583,4 true 3.833,6.75 4.667,5.417 4.667,5.417 5.25,5.417 true 4.083,7.365 4.333,7.698 4.333,7.698 4.917,7.698 true 4.865,0.188 5.177,0.344 0.313,0.156 10 false *1 1.885,3.646 2.198,3.802 0.313,0.156 10 false *2 4.333,3.573 4.646,3.729 0.313,0.156 10 false *3 5.438,3.583 5.75,3.74 0.313,0.156 10 false *4 3.635,3.927 3.948,4.083 0.313,0.156 10 false *5 5.292,5.365 5.604,5.521 0.313,0.156 10 false *6 4.958,7.604 5.271,7.76 0.313,0.156 10 false *7 1.406,3.875 1.719,4.031 0.313,0.156 10 false *a 4.021,0.229 4.156,0.417 0.135,0.188 10 true A 4.031,3.51 4.167,3.698 0.135,0.188 10 true A 2.531,5.031 2.844,5.229 0.313,0.198 10 false *1




c.

Impact Absorbing Structure for Rear Collision

i.

Rear side members are used to reduce body deformation in a rear collision.

Y217108C01
3.167,1.208 3.5,0.375 3.5,0.375 3.75,0.375 true 3.167,3.667 3.5,4.5 3.5,4.5 3.75,4.5 true 3.813,0.333 4.125,0.531 0.313,0.198 10 false *1 3.802,4.406 4.115,4.604 0.313,0.198 10 false *1
*1 Rear Side Member - -
V100136

Impact Energy
V100135

Dissipate



ii.

A protector is provided around the fuel inlet pipe hole. This suppresses deformation of the fuel inlet during a rear collision.

Y214466C01
4.417,0.583 4.75,0.333 4.75,0.333 5.167,0.333 true 5.188,0.24 5.5,0.438 0.313,0.198 10 false *a
*a Protector - -




d.

Roof Crush Resistance

i.

When the roof is subjected to an impact, the impact is dispersed to the roof reinforcements, front pillars and center pillars, there by minimizing deformation of the cabin.

Y217109C01
3.708,1.99 3.844,1.958 false
V100136

Impact Energy
V100135

Dissipate




e.

Reduction Pedestrian Head Injury

i.

The following shape is used for around the front body, thus maintaining necessary rigidity and aiming for a reduction of impact against a pedestrian in a collision with a pedestrian.

·

The parts surrounding the cowl top ventilator louver sub-assembly use a crushable structure to improve the rate of energy absorption from the estimated collision direction to reduce the impact to the pedestrian whose head, etc., struck the area. The structure of the cowl top ventilator louver sub-assembly maintains the necessary rigidity while having a lowered deformation strength in order to absorb impact load.

Y212601C01
4.292,3.563 4.573,2.875 4.573,2.875 4.719,2.875 true 3.615,1.667 3.771,1.865 0.156,0.198 10 true A 3.635,0.625 3.792,0.823 0.156,0.198 10 true A 0.573,2.354 0.885,2.552 0.313,0.198 10 false *a 4.75,2.844 5.063,3.042 0.313,0.198 10 false *b
*a A - A Cross Section *b Impact Absorption Stroke