FUNCTION
|
*1: Models with Toyota safety sense *2: Models with blind spot monitor system *3: Models with TOYOTA parking assist-sensor system *4: Models with parking assist monitor system *5: Models with radio and display receiver assembly *6: Models with tire pressure warning system *7: Models with occupant classification system *8: Models with seat position memory system *9: Models with headup display system *10: Models with power tilt and power telescopic system |
|
| Central Gateway ECU (Network Gateway ECU) | Forward Recognition Camera*1 |
| Millimeter Wave Radar Sensor Assembly*1 | Swing Grille Actuator Assembly |
| Blind Spot Monitor Sensor RH*2 | Clearance Warning ECU Assembly*3 |
| Rear Television Camera Assembly*4 | Hybrid Vehicle Control ECU Assembly |
| Inverter with Converter Assembly | Brake Booster with Master Cylinder Assembly |
| ECM | Radio and Display Receiver Assembly*5 |
| Tire Pressure Warning ECU and Receiver*6 | Occupant Detection ECU*7 |
| Brake Booster with Master Cylinder Assembly | Power Steering ECU (Rack and Pinion Power Steering Gear Assembly) |
| Parking Brake ECU Assembly | Steering Sensor |
| Airbag Sensor Assembly | Headlight ECU Sub-assembly RH |
| Headlight ECU Sub-assembly LH | Outer Mirror Control ECU Assembly RH*8 |
| Outer Mirror Control ECU Assembly LH*8 | Position Control ECU Assembly RH*8 |
| Air Conditioning Amplifier Assembly | Certification ECU (Smart Key ECU Assembly) |
| Main Body ECU (Multiplex Network Body ECU) | Headup Display (Meter Mirror Sub-assembly)*9 |
| Multiplex Tilt and Telescopic ECU*10 | Combination Meter Assembly |
DIAGNOSIS
If a malfunction occurs on a CAN communication bus, ECUs that are connected to the CAN communication bus store Diagnostic Trouble Codes (DTCs) in memory.
The 5-digit DTCs can be read by connecting the Global TechStream (GTS) to the DLC3.
For details, refer to the Repair Manual.