FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: Except models with DVD player *2: Models with DVD player *3: Except models with 9-speaker surround sound system *4: Models with 9-speaker surround sound system *5: Models with headup display *6: Models with navigation system *7: Models for Oceania *8: Models with Wi-Fi communication function *9: Models with MirrorLink function *10: Models with Miracast function *11: Models with Digital Audio Broadcast (DAB) tuner *12: Models with multimedia system *13: Except models with audio system *14: Models with multimedia system, 9-speaker surround sound system or navigation system *15: Models with cooler control switch assembly |
|
| Radio and Display Receiver Assembly | ·
Plays back audio from each audio source, such as radio, CD and Bluetooth audio.*1 ·
Plays back audio from each audio source, such as radio, CD, DVD and Bluetooth audio.*2 ·
Sends audio signals from each audio source to the speakers.*3 ·
Sends audio signals from each audio source to the stereo component amplifier assembly.*4 ·
Sends the status information of each audio source and hands-free system to the combination meter assembly. ·
Receives operation signals from the combination meter assembly to change the audio source, make a call or take a call based on the audio source and hands-free system settings set on the multi-information display. ·
Sends status information of each audio source to the meter mirror sub-assembly.*5 ·
Sends a startup signal to the navigation ECU when the audio system started.*6 ·
Sends microphone voice signals to the navigation ECU.*6 ·
Sends and receives content information from the application server through a Bluetooth connected smartphone.*7 ·
Using the built-in application player, operates and displays applications that are installed on the Bluetooth connected smartphone.*7 ·
When utilizing audio content, outputs the sound from applications to the vehicle speakers.*7 ·
Is equipped with an application player to run applications.*7 ·
Is equipped with a 2.4 GHz frequency band wireless LAN and can communicate with a wireless clients via Wi-Fi.*8 ·
Is equipped with a 2.4 GHz frequency band wireless LAN and can communicate with a MirrorLink device*9 or Miracast device*10 via Wi-Fi (P2P mode). |
| Navigation ECU*6 | Enables the use of navigation function when installed to the radio and display receiver assembly. |
| Window Glass Antenna Wire (Rear)
·
AM ·
FM Main ·
FM-sub |
Receives radio broadcasting signals (AM/FM main/FM-sub). |
| No. 1 Amplifier Antenna Assembly | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. |
| No. 2 Amplifier Antenna Assembly | |
| Window Glass Antenna Wire (Rear)
·
DAB*11 |
Receives radio broadcasting signals (DAB). |
| Digital Audio Broadcasting Antenna Assembly*11 | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. |
| Navigation Antenna Assembly
·
GPS Antenna |
Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly*12 or navigation ECU*6. |
| Steering Pad Switch Assembly | ·
Sends operation signals from switches such as the volume switch and mode switch, to the spiral cable sub-assembly.*13 ·
Sends operation signals from switches such as the volume switch, mode switch, seek switch, telephone switch and voice switch, to the spiral cable sub-assembly.*14 |
| Spiral Cable Sub-assembly | Sends operation signals from the steering pad switch assembly to the radio and display receiver assembly.*14 |
| Roof Console Box Sub-assembly | Houses the telephone microphone assembly. |
| Telephone Microphone Assembly | ·
Receives the user's voice through the microphone module. ·
Recognizes speech during voice recognition system operation and sends the audio signal to the radio and display receiver assembly. |
| Cooler Control Switch Assembly*15 | Sends operation signals from switches such as the channel up/down switch, tune up/down switch, volume up/down switch, power switch and mode switch operation to the radio and display receiver assembly. |
| No. 1 Stereo Jack Adapter Assembly | ·
Sends audio signals to the radio and display receiver assembly when an auxiliary device is connected. ·
Communicates with the radio and display receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected. ·
By connecting a smartphone with Toyota Link apps installed via a USB cable, communicates with the radio and display receiver assembly via a USB communication line.*7 |
| Stereo Component Amplifier Assembly*4 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. |
| Combination Meter Assembly | ·
Sends vehicle speed signals to the radio and display receiver assembly, stereo component amplifier assembly*4 and navigation ECU*6. ·
Displays the status information of each audio source, hands-free system and voice recognition system which is received from the radio and display receiver assembly on the multi-information display. ·
Sends operation signals to the radio and display receiver when the audio source and hands-free system settings are set on the multi-information display. |
| Meter Mirror Sub-assembly*5 | Receives audio source status information from the radio and display receiver assembly and displays the audio source status on the headup display. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.