FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
|
*1: Models with standard navigation model *2: Models with JBL premium navigation model *3: Models with headup display *4: Models with Digital Audio Broadcast (DAB) tuner *5: Models with voice recognition system |
||
| Radio and Display Receiver Assembly | ·
Receives operation signals from the panel switches and touch-sensitive display panel, which allows flick, drag or pinch in/pinch out operation, and data from various components positioned in different parts of the vehicle and sends them to the navigation ECU. ·
Processes navigation information and the operation status from the navigation ECU and displays them on the multi-display. ·
Receives audio signals such as voice guidance from the navigation ECU and sends them to the speakers.*1 ·
Receives audio signals such as voice guidance from the navigation ECU and sends them to the stereo component amplifier assembly.*2 ·
Sends a startup signal to the navigation ECU when the audio system started. ·
Sends microphone voice signals to the navigation ECU. ·
Sends an R shift position signal to the navigation ECU. |
|
| Major Components of Radio and Display Receiver Assembly | Multi-display Panel | ·
Displays a map screen or an operation screen based on image signals from the navigation ECU. ·
Sends operation signals input via the capacitive display panel to the navigation ECU. |
| Navigation ECU | ·
Houses a navigation computer, gyro sensor, GPS receiver and storage device, and processes operation signals or vehicle status signals from the radio and display receiver assembly, controlling the navigation system. ·
Sends image and audio signals, such as navigation information, and the operation status to the radio and display receiver assembly. |
|
| Major Components of Navigation ECU | Navigation Computer | ·
Corrects the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status. ·
Applies the mark of the calculated vehicle position to the map database and sends the information and operation status to the radio and display receiver assembly. ·
Sends audio signals such as voice guidance provided in accordance with the vehicle position, to the radio and display receiver assembly. ·
Sends voice guidance audio signals to the radio and display receiver assembly. ·
Sends navigation information such as directions and route guidance, etc. to the combination meter assembly and meter mirror sub-assembly*3 via the radio and display receiver assembly. |
| Gyro Sensor | Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer. | |
| GPS Receiver | Demodulates GPS information received by the navigation antenna assembly, calculates the vehicle position and sends the position signal to the navigation computer. | |
| Storage Device | Contains map data and the navigation system control program, etc. | |
| Navigation Antenna Assembly
·
GPS Antenna |
Receives GPS signals from satellites in orbit around the Earth, at an altitude of approximately 20,200 km (12,600 miles), and sends them to the navigation ECU. | |
| Window Glass Antenna Wire
·
AM ·
FM Main ·
FM-sub |
Receives radio broadcasting signals (AM/FM main/FM-sub). | |
| No. 1 Amplifier Antenna Assembly | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. | |
| No. 2 Amplifier Antenna Assembly | ||
| Window Glass Antenna Wire (Rear)
·
DAB*4 |
Receives radio broadcasting signals (DAB). | |
| Digital Audio Broadcasting Antenna Assembly*4 | Amplifies DAB signals from the DAB antenna and sends them to the radio and display receiver assembly. | |
| Parking Brake ECU (Brake Actuator Assembly) | Sends the parking brake position signal to the radio and display receiver assembly. | |
| Steering Pad Switch Assembly | Sends operation signals from switches such as the volume switch, mode switch and voice switch to the spiral cable sub-assembly. | |
| Spiral Cable Sub-assembly | Sends operation signals from the steering pad switch assembly to the radio and display receiver assembly. | |
| Roof Console Box Sub-assembly | Houses the telephone microphone assembly. | |
| Telephone Microphone Assembly | ·
Receives the user's voice through the microphone module. ·
Recognizes speech during voice recognition system operation and sends the audio signal to the radio and display receiver assembly.*5 |
|
| No. 1 Stereo Jack Adapter Assembly | ·
Sends audio signals to the radio and display receiver assembly when an auxiliary device is connected. ·
Communicates with the radio and display receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected. |
|
| Stereo Component Amplifier Assembly*2 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. | |
| Combination Meter Assembly | ·
Sends vehicle speed signals to the radio and display receiver assembly, navigation ECU and stereo component amplifier assembly*2. ·
Displays navigation information from the navigation ECU, such as directions and route guidance, etc., on the multi-information display via the radio and display receiver assembly. |
|
| Meter Mirror Sub-assembly*3 | Displays navigation information from the navigation ECU, such as directions and route guidance, etc., on the headup display via the radio and display receiver assembly. | |
FUNCTION
Navigation Screen
The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:
Map database
Global Positioning System (GPS) satellites
Built-in gyro sensor
Vehicle speed signal
Reverse signal
Parking brake signal
Radio Data System Traffic Message Channel (RDS-TMC) signal (Models for Oceania and Taiwan)
The functions of the navigation screen are listed below.
| Item | Function | |
|---|---|---|
|
*1: Models for Oceania *2: Models for G.C.C. countries *3: Models for Taiwan |
||
| Map Display | Taillight-interlocked Map Screen Color Change | Changes the color of the map screen that is displayed when the taillights are turned on. |
| Map Display Color Change | Changes the color of the map screen. | |
| North Up/Heading Up | ·
If North Up is selected, regardless of the direction of vehicle travel, north is always up. ·
If Heading Up is selected, the direction of vehicle travel is always up. |
|
| 3D Map | Displays a 3-dimensional (3D) view of the map. | |
| Micro City Map*1*3 | Displays some areas of major cities with a 2D city map when the map scale is set to 50 m or less. | |
| 3D Suburb Model Map*1 | When displaying a 3-dimensional (3D) map and the map scale is set to 100 m or less, a 3D suburb model map can be displayed for some areas of major cities. | |
| 3D City Model Map*2*3 | ·
Displays some areas of major cities with a 3-dimensional (3D) city model map when the map scale is set to 100 m or less. ·
Always displayed in Heading Up mode. |
|
| Dual Map Screen | Splits the map in two, and adjusts the scale and orientation of each screen independently. | |
| Compass Mode Screen | Displays the direction of travel and detailed data of the present location. | |
| Current Position Display | Function Displays the current position based on the GPS signals being received. | |
| Point of Interest Display | Displays selected types of points of interest as marks on the map. | |
| Nearby POI List Display | Displays the list of POIs which are located within 20 miles (32 km) from vehicles current position. | |
| Map Scroll | The map screen can be scrolled by touching, dragging or flicking it. | |
| Map Scale | Changes the map scale using any of the following methods:
·
Scale screen and choose 1 of 14 steps. Also, any desired map scale can be selected by touching the scale indicator. ·
Pinch in/out: Pinch outward on the screen to zoom in and pinch inward to zoom out. |
|
| Route Guidance Demonstration | Demonstrates the route guidance to the destination. | |
| Street Name Indication on Scrolled Map | Displays the street name and city name even when the map screen is being scrolled. | |
| Road Number Sign Board | Displays the road number on the map. | |
| Speed Limit Display | Displays a speed limit icon on the map screen when driving on a major road. | |
| One-way road display | Displays one-way roads with an arrow showing direction. | |
| Route Trace | ·
Stores up to the last 124 miles (200 km) of a traveled route and retraces the route on the display. ·
Available when the map scale is set to 30 miles (50 km) or less. |
|
| RDS-TMC Display*1*3 | Displays RDS-TMC icons, arrows, pop-up messages and indicators when RDS-TMC service is being received. | |
| Destination Search | Keyword Search*1 | Enables a destination to be searched for using multiple free words. |
| Favorites List Search | Sets a destination from an item in the favorites list (Memory Point). | |
| Recent Set Destination Search | Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past. | |
| Address Search | After defining a state (province) or country, the destination can be set in 2 ways:*1
·
Information can be entered in the order of: suburb name, street name and house number. ·
Information can be entered in the order of: house number, street name and suburb name. |
|
| After defining a state (province) or country, the destination can be set in 2 ways:*2
·
Information can be entered in the order of: city name, street name and house number. ·
Information can be entered in the order of: house number, street name and city name. |
||
| Information can be entered in the order of: province, town name, street name and area number.*3 | ||
| Point of Interest Search | After defining a state (province) or country, the destination can be set in 3 ways:*1
·
The name of a POI can be entered and then searched for from suburb, category or use web. ·
A POI category can be selected and a point of interest searched for near the present location, along the current route, near the suburb center or near the destination. ·
The phone number of a point of interest can be entered to search for it. |
|
| After defining a state (province) or country, the destination can be set in 3 ways:*2*3
·
The name of a POI can be entered and then searched for from city or category. ·
A POI category can be selected and a point of interest searched for near the present location, along the current route, near the city center or near the destination. ·
The phone number of a point of interest can be entered to search for it. |
||
| Coordinate Search | A destination can be input by entering its coordinates. | |
| Emergency Search | Performs a specific search for police stations, hospitals and Toyota dealers, etc. | |
| Map Search | A destination can be set by using the cursor on the map screen. | |
| Voice-recognition Search*1 | A destination can be set by voice command input. | |
| Smartphone Collaboration Search*2 | A location that is searched for on a smartphone that is connected to the radio and display receiver assembly via Bluetooth, can be set as a destination. | |
| Automatic Destination List Search | ·
By registering home and favorite destinations (up to 2 locations) in advance, when turning the ignition switch is turned to ACC or ON, the destination list together with the required time based on route search result is displayed. ·
Starts route guidance when a destination is selected from the list. |
|
| Toyota Link Apps Search*1 | A point searched for using Toyota Link apps can be set as a destination. | |
| Route Search | Multiple Destination Setting | Sets multiple destinations. Can also rearrange the sequence of destinations. |
| Multiple Route Search | Searches for multiple routes. | |
| Search Condition Designation | Enables a search to be performed using quick, short and alternate search conditions. The results are displayed with the distance and expected arrival time of each of the 3 routes. | |
| Preference Selection When Searching | Enables preferences related to motorways, unsealed roads,4WD tracks, etc., to be set.*1 | |
| Enables preferences related to motorways, toll roads, ferries, etc., to be set.*2*3 | ||
| Detour Search | Changes the route to detour around a section of the route. | |
| Regulated Road Consideration | Performs searches which consider regulated roads. | |
| Traffic Congestion Information Consideration*1*3 | Performs searches which consider traffic congestion information. | |
| Avoidance Area | Searches for a route that avoids a designated area. | |
| Avoid Traffic Search*1*3 | Automatically changes the route to avoid heavy congestion. | |
| Adaptive Route Search | When a route other than the route guidance is traveled frequently, the navigation system learns that route and displays it as an adaptive route in the route search results. | |
| Guidance | Voice Guidance | Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed. |
| Next Turn Guidance | Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow. | |
| Turn List Display | Displays a turn list on the right side of the 2-screen display. | |
| Arrow (Turn-by-Turn) Display | Displays the direction of the next turn and the distance to the turn on the right side of the 2-screen display. | |
| Lane Information Guidance | Provides lane information and indicates the lane to be driven in when the vehicle is on a multiple lane road. | |
| Lane List Display*1 | When traveling a road with two or more lanes when using route guidance, the navigation system indicates the direction and recommended lane when lane information available in the map data. | |
| Intersection Zoom-in Display | Zooms in the map display when approaching an intersection. | |
| Signposts Display | Displays lane information similar to overhead road traffic signs on the top of the map screen. | |
| Motorways Mode Display*1*2 | Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit. | |
| Freeway Mode Display*3 | Displays the distance to the next junction and exit, or POIs in the vicinity of the freeway exit. | |
| Real Motorway Junction Display*1*2 | Displays the junction and signage in 3D in the vicinity of a major junction while driving. | |
| Real Freeway Junction Display*3 | Displays the junction and signage in 3D in the vicinity of a major junction while driving. | |
| Real Motorway Exit Display*2 | When approaching a major exit, displays a 3D image of the exit on the side screen. | |
| Tollgate Guidance*2 | Displays the junction and signage in 3D in the vicinity of a major tollgate while driving. | |
| Direction Sign Display | Displays direction signs, similar to overhead motorway signs, with route guidance information overlaid. | |
| Route Information Bar Display | Displays the following information:
·
Distance and travel time to the destination ·
Distance to the destination and estimated time of arrival ·
Destinations list when there are multiple destinations |
|
| Traffic Bar Display*1*3 | Displays traffic information of congestions or accidents on the route using the traffic bar. | |
| Others | Voice Recognition*1 | Recognizes pre-programmed system commands spoken to operate the navigation system. |
| Driver Support Information*1 | When the vehicle is approaching a specific zone such as a school zone, railway crossing, high accident zone, speed camera, etc., provides the driver with an announcement by chime, voice warning or warning icon according to the distance to the target. | |
Information Screen
The functions of the information screen display are listed below.
The display order of the menu icons may vary depending on country where the vehicle is sold.
| Item | Outline |
|---|---|
|
*1: Models for Oceania *2: Models for Taiwan |
|
| ECO | Information about fuel consumption per minute or per trip can be displayed. |
| Traffic Incidents*1*2 | ·
By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on an incident's distance and position relative to the vehicle. When the user sets a route that receives traffic information (My traffic routes), traffic information along the route is displayed. ·
When the user sets a route that receives traffic information (My traffic routes), traffic information along the route is displayed. |
Setup Screen
The settings for the functions of the multi-display are available from the setup screen.
The display order of the menu icons or menu items may vary depending on the country where the vehicle is sold.
| Item | Function |
|---|---|
|
*1: Models for Oceania *2: Models for G.C.C. countries *3: Models for Taiwan *4: PBAP non-compatible phone, or PBAP compatible phone with the automatic contact/history transfer function set to off. |
|
| General Settings | ·
The time zone and daylight savings time can be adjusted, and GPS synchronization of the clock and 24 hour time format can be turned on/off. (When GPS synchronization is set to off, the clock can be adjusted manually.)*1*2 ·
The automatic adjustment of the clock assembly can be turned on/off. (When GPS synchronization is set to off, the clock can be adjusted manually.)*3 ·
The language can be selected.*2 ·
The home screen display layout can be changed. ·
The color of the screen theme can be changed. ·
The beep sound can be turned off. ·
The unit of measurement for distance/fuel consumption can be changed.*1*2 ·
Automatic return from the audio control screen to the home screen after audio control operation can be changed. ·
Keyboard layout can be changed.*1 ·
Entered keyboard history can be deleted. ·
Keyboard history memory can be turned on/off. ·
Animations can be set to on/off. ·
The link system for a smartphone that is connected to the navigation system via USB cable can be selected.*2 ·
Registered information (personal data) can be cleared. ·
The navigation system program can be updated. ·
Third party software information used in the navigation system, can be displayed. ·
The button sensitivity of the capacitive touch screen can be changed. |
| Bluetooth Settings | ·
Bluetooth devices can be selected, connected or edited. ·
Bluetooth devices can be registered. ·
Bluetooth devices can be deleted. ·
Bluetooth system settings can be displayed or changed: -
Automatic connection to a Bluetooth device -
Automatic connection priority of devices for both the Bluetooth hands-free system and Bluetooth audio system -
Bluetooth device details can be displayed or changed: - Bluetooth device name - Bluetooth device PIN-code - Bluetooth device address - Display of Bluetooth device connection status of the phone - Display of Bluetooth device connection status of the audio player - Bluetooth device profile |
| Audio Settings | ·
Set detailed audio settings such as: -
Cover art display -
Video screen size change -
Video image quality adjustment ·
FM radio settings can be changed: -
The FM radio text feature can be set ·
DVD settings can be changed:*2*3 -
Audio language -
Subtitle language -
DVD video menu language -
Multi-angle mark display during multi-angle compatible disc playback -
Viewer restriction level -
Auto start playback -
Volume difference adjustment between the lowest and highest volume ·
DAB settings can be changed:*1 -
L-band in the tune range can be set -
Setting to automatically seek a DAB station that regularly broadcasts traffic information and station broadcasts can be set -
Setting to automatically select a DAB station providing good reception if current reception worsens can be set -
The DAB text feature can be set |
| Phone Settings*1 | ·
Bluetooth devices can be selected, connected or edited. ·
Phone sound settings can be changed: -
Ring Tone -
Ring Tone Volume -
In-call Volume -
E-mail Incoming Tone -
SMS/MMS Incoming Tone -
SMS/MMS Incoming Tone Volume -
E-mail Incoming Tone Volume -
Message Readout volume ·
Notification settings can be changed: -
Incoming call display "Full Screen": The incoming call display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the top of the screen. -
SMS/MMS notification pop-up -
Incoming SMS/MMS display when an SMS/MMS message is received "Full Screen": The incoming SMS/MMS display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the top of the screen. -
E-mail notification pop-up -
Incoming e-mail display when an e-mail is received "Full Screen": The incoming e-mail display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the top of the screen. -
Contact/history transfer completion message display ·
Contact/Call history settings can be changed: -
Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected -
Contacts update by the connected phone or USB memory device -
Contacts Sorting -
Contact addition to the favorites list -
Contacts deletion from the favorites list -
Call history deletion*4 -
New contact addition to the contact list*4 -
Contact list editing*4 -
Contact deletion from the contact list*4 ·
Message function settings can be changed: -
Message automatic forwarding from cellular phones -
Automatic message readout -
Message read status on phone update -
Display the message account name of the Bluetooth connected phone on the message screen -
Vehicle signature on outgoing messages |
| Phone Settings*2*3 | ·
Bluetooth devices can be selected, connected or edited. ·
Phone sound settings can be changed: -
Ring Tone -
Ring Tone Volume -
In-call Volume ·
Notification settings can be changed: -
Incoming call display "Full Screen": The incoming call display screen is displayed and can be operated on the screen. "Drop-Down": A message is displayed on the top of the screen. -
Contact/history transfer completion message display ·
Contact/Call history settings can be changed: -
Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected -
Contacts update by the connected phone or USB memory device -
Contacts Sorting -
Contact addition to the favorites list -
Contacts deletion from the favorites list -
Call history deletion*4 -
New contact addition to the contact list*4 -
Contact list editing*4 -
Contact deletion from the contact list*4 -
Voice tags can be added, edited and deleted |
| Voice Settings | ·
The voice guidance volume can be adjusted. ·
Voice guidance during route guidance can be set. ·
The voice guidance for when using the audio and visual system can be set. ·
Voice recognition prompts can be set.*1 ·
The navigation guidance beep sound can be set. |
| Vehicle Settings | ·
Settings can be changed for the following maintenance items: -
Reminder -
Engine oil -
Oil filter -
Rotation -
Tyres/Tires -
Battery -
Brake pad -
Wipers -
Coolant -
Brake fluid/Brake oil -
Trans. fluid -
Service -
Air filter -
Personal -
Delete all -
Reset all -
Set dealer ·
Customizable vehicle settings can be changed. |
| Navigation Settings | The Navigation Settings can be used to:
·
Set and edit the Home ·
Set up preset favorites list ·
Set up Areas to Avoid ·
Set detailed navigation settings such as: -
The pop-up information display -
The favorite POI categories displayed on the map screen -
Guidance for IPD roads -
Unverified road guidance warning -
Voice guidance for the next street name -
The display of the intersection zoomed map -
The automatic zooming function -
Map display color -
Map animation -
Clear adaptive route data -
Manual adjustment of the current vehicle position mark and correction of the miscalculated distance caused by tire replacement -
The display of the 3D suburb map*1 -
The display of the 3D city map*2*3 -
The search range when nearby gas stations are being searched when the fuel level is low. -
Edit or delete route traces, save memory points to a USB memory device as backup -
Speed limit display -
Speed threshold for speed limit warning message for each road type*1 -
Time restriction notification -
Private road notification -
Automatic destination list display -
Notification of SALIK gate on the route to the destination*2 -
Adaptive routes -
Alert areas for driver support information*1 -
Safety zone display on the map screen*1 |
| Wi-Fi Settings*2*3 | ·
The Wi-Fi function can be switched on/off. ·
Network access can be turned on/off. ·
Connected network name can be displayed. ·
Available networks that can be connected can be searched for. ·
A WPS (Wi-Fi Protected Setup) compatible Wi-Fi device can be connected quickly. ·
Wi-Fi settings can be changed: -
The networks list can be edited -
An automatic connection to a preferred network can be set -
An automatic connection message can be set ·
The Miracast connection status is displayed. ·
The MirrorLink connection status is displayed. |
| Wi-Fi Settings*1 | ·
The Wi-Fi function can be switched on/off. ·
The Miracast connection status is displayed. |
| Traffic Info Settings*3 | ·
The traffic information reception for the specified routes, such as frequently used routes, can be set. ·
The avoid traffic function can be set to auto/manual. ·
The usage of traffic information for the estimated arrival time can be set to on/off. ·
An arrow display for free flowing traffic can be set to on/off. ·
Voice warning when a traffic incident is displayed can be set to on/off. ·
Traffic information icon display can be set to on/off. |
| MirrorLink Settings*2*3 | Connection method of a MirrorLink device can be selected. |
| Toyota Link Settings*1 | ·
The pop-up reminder for cellular phone data usage can be set. ·
The settings for automatic on/off detection of the iPhone app can be set. ·
The settings for the extension mode when a USB device is connected can be set. ·
Apps can be installed via a USB device. |
| App Suite Settings*2 | Message display setting when using Apps data can be changed. |
| Traffic Settings*1 | ·
The traffic information reception for the specified routes, such as frequently used routes, can be set. ·
The auto avoid traffic function can be set to on/off. ·
The usage of traffic information for the estimated arrival time can be set to on/off. ·
An arrow display for free flowing traffic can be set to on/off. ·
Consideration of the predictive traffic information for the estimated arrival time and detoured route search can be set to on/off. ·
Voice warning when a traffic incident is displayed can be set to on/off. ·
Traffic information icon display can be set to on/off. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.