Home › Vehicle Exterior › DOOR / HATCH › FUEL LID OPENER SYSTEM › from 2018.08
NM33C0E _59 Vehicle Exterior _067938 DOOR / HATCH _0330995 FUEL LID OPENER SYSTEM CO CONTROL F

DOOR / HATCH  FUEL LID OPENER SYSTEM  CONTROL  FUEL LID OPENER CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The fuel lid opener system consists of the following parts:

Models with Canister Pump Module
Component Function
Main Body ECU (Multiplex Network Body ECU) Receives signals from various ECUs and switches and sends them to the ECM.
Hybrid Vehicle Control ECU Assembly
·

Sends a shift lever position signal to the main body ECU (multiplex network body ECU)

·

Sends the stop light switch on signal to the main body ECU (multiplex network body ECU).


Fuel Lid Opener Switch Pressing the fuel lid opener switch located on the driver side instrument panel causes the fuel lid to unlatch.
Fuel Lid Lock with Motor Assembly
·

Motor

·

Fuel Lid Courtesy Switch

·

Emergency Opener


·

The fuel lid lock with motor assembly consists of a built-in motor that opens the fuel lid via a linkage.

·

If the fuel lid lock with motor assembly malfunctions, the fuel lid can be opened manually by pulling on the emergency opener that is provided on the fuel lid lock with motor assembly.

·

Whether the fuel lid is open or closed can be determined by the state (on or off) of fuel lid courtesy switch.

·

Allows the user to manually unlatch the fuel lid lock with motor assembly.


Brake Actuator Assembly
·

Parking Brake ECU


Sends a stop light switch on signal to the hybrid vehicle control ECU assembly.
Brake Booster with Master Cylinder Assembly
·

Skid Control ECU


Sends a parking brake operation signal to the hybrid vehicle control ECU assembly.
Combination Meter Assembly
·

Multi-information Display


·

Displays warnings in accordance with a signal from the ECM that has judged that the fuel lid is open.

·

Sends a vehicle speed signal to the main body ECU (multiplex network body ECU).


ECM Sends fuel lid open signal to the combination meter assembly, fuel lid lock with motor assembly based on signals from sensors and switches.

Models without Canister Pump Module
Component Function
Main Body ECU (Multiplex Network Body ECU) Receives signals from various ECUs and switches and drives the fuel lid lock with motor assembly
Hybrid Vehicle Control ECU Assembly
·

Sends a shift lever position signal to the main body ECU (multiplex network body ECU)

·

Sends the stop light switch on signal to the main body ECU (multiplex network body ECU).


Fuel Lid Opener Switch Pressing the fuel lid opener switch located on the driver side instrument panel causes the fuel lid to unlatch.
Fuel Lid Lock with Motor Assembly
·

Motor

·

Emergency Opener


·

The fuel lid lock with motor assembly consists of a built-in motor that opens the fuel lid via a linkage.

·

If the fuel lid lock with motor assembly malfunctions, the fuel lid can be opened manually by pulling on the emergency opener that is provided on the fuel lid lock with motor assembly.

·

Allows the user to manually unlatch the fuel lid lock with motor assembly.


Brake Actuator Assembly
·

Parking Brake ECU


Sends a parking brake operation signal to the hybrid vehicle control ECU assembly.
Brake Booster with Master Cylinder Assembly
·

Skid Control ECU


Sends a stop light switch on signal to the hybrid vehicle control ECU assembly.
Combination Meter Assembly Sends a vehicle speed signal to the main body ECU (multiplex network body ECU).



SYSTEM CONTROL


a.

The operating conditions of the fuel lid opener system are as follows:

Operation Condition

*: By using customize settings, the fuel lid can be set to open immediately after the fuel lid opener switch is pressed. Refer to the repair manual for details.

Fuel Lid Open When the fuel lid is closed and all of the following prerequisite conditions are met, the fuel lid opens when the fuel lid opener switch is pressed for 0.8 seconds or more.*
·

Power switch is off.

·

Power switch is on (IG), vehicle speed is approximately 5 km/h (approximately 3 mph) or less and shift lever is in P.

·

Power switch is on (IG), vehicle speed is approximately 5 km/h (approximately 3 mph) or less and brake pedal is depressed.

·

Power switch is on (IG), vehicle speed is approximately 5 km/h (approximately 3 mph) or less and parking brake is engaged.