Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2019.02
NM33C0E _59 Vehicle Exterior _068036 LIGHTING (EXT) _0331933 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  AUTOMATIC LIGHT CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function

*1: Except models with automatic headlight beam level control system

*2: Models with automatic headlight beam level control system

*3: LHD models

*4: RHD models

*5: Models with rear side marker light

Main Body ECU (Multiplex Network Body ECU)
·

Receives various signals and illuminates the exterior lights*1.

·

Receives various signals and transmits the exterior light control signal*2.


Headlight ECU Sub-assembly LH/RH*2 Receives light control signal and illuminates the headlights and clearance lights.
No. 1 Engine Room Relay Block and No. 1 Junction Block Assembly
·

H-LP LH Relay*1

·

H-LP RH Relay*1


Supplies power to the headlights.
Front Door Courtesy Light Switch Assembly (LH*3/RH*4) Detects whether a driver door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU).
Automatic Light Control Sensor Detects the ambient light level.
Instrument Panel Junction Block Assembly
·

TAIL Relay


Supplies power to the clearance lights*1, taillights, rear side marker lights*5 and license plate lights.
Turn Signal Switch
·

Light Control Switch


Outputs a light control switch signal.
Steering Sensor Receives light control switch signal from the turn signal switch and transmits it to the main body ECU (multiplex network body ECU).


SYSTEM CONTROL


a.

Operating Condition

i.

The automatic light control system operates as follows:

Models for Australia and G.C.C. countries and destination package for South Korea
Function Outline
Taillights turn on When all of the following conditions are met, the taillights, clearance lights, and license plate lights automatically turn on:
·

The ambient light is dim or momentarily dark.

·

The power switch is on (IG).

·

The light control switch is in the AUTO position.


Headlights and Taillights turn on When all of the following conditions are met, the headlights, taillights, clearance lights, and license plate lights automatically turn on:
·

The ambient light is dark or momentarily bright.

·

The power switch is on (IG).

·

The light control switch is in the AUTO position.


Headlights and Taillights turn off When the ambient light is bright, the exterior lights automatically turn off.

Except models for Australia and G.C.C. countries and destination package for South Korea
Function Outline
Headlights and Taillights turn on When all of the following conditions are met, the headlights, clearance lights, taillights, rear side marker lights and license plate lights automatically turn on:
·

The ambient light is dark or momentarily bright.

·

The power switch is ON.

·

The light control switch is in the AUTO position.


Headlights and Taillights turn off When the ambient light is bright, the exterior lights automatically turn off.




DIAGNOSIS


a.

When the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control system, Diagnostic Trouble Codes (DTCs) are stored in memory.


b.

The DTCs can be read using the Global TechStream (GTS). For details, refer to the Repair Manual.