Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM › 2019.02–2021.02
NM33C0E _53 Suspension _065984 REAR SUSPENSION _0321832 REAR SUSPENSION SYSTEM DE DETAILS F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  DETAILS  COIL SPRING AND SHOCK ABSORBER  


CONSTRUCTION


a.

The spring rate of the coil spring is optimized to achieve excellent controllability and ride comfort.


b.

Spring insulators are provided at the top and bottom ends of the rear coil springs to ensure excellent vibration suppression.


c.

A low-pressure (N2) gas sealed rear shock absorber is used to achieve a high level of controllability, driving stability and ride comfort.

HINT:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding the low-pressure (N2) gas sealed in the shock absorber. For details, refer to the Repair Manual.



d.

A resin absorber cap is used to reduce weight.


e.

Except Models for Europe

i.

The digressive type piston valve opens in 2 different stages according to the piston speed to ensure an optimal damping force at very low piston speeds and middle/high piston speeds.

1.

As only the stage 1 valve opens at very low piston speeds to ensure sufficient damping force even during minor movements, an enhanced response and comfortable flat ride have been achieved.

2.

At middle/high piston speeds such as during a strong input, the stage 1 and stage 2 valves open to reduce the damping force in order to increase ride comfort and reduce transmitted shock.

X135714C01
3.719,0.448 6.469,2.333 2.75,1.885 3.719,2.531 6.469,4.417 2.75,1.885 1.083,2.448 1.635,2.448 true 1.063,3.031 1.365,3.031 true 1.083,4.021 1.385,4.021 true 1.76,3.646 2.271,3.646 true 1.906,2.375 2.333,2.375 true 1.833,1.583 2.208,1.146 2.208,1.146 2.375,1.146 true 1.094,1.115 1.281,1.115 1.281,1.115 1.552,1.5 true 0.927,1.042 1.24,1.198 0.313,0.156 10 false *1 0.917,2.365 1.229,2.521 0.313,0.156 10 false *2 0.896,2.958 1.208,3.115 0.313,0.156 10 false *3 0.927,3.948 1.24,4.104 0.313,0.156 10 false *4 2.313,3.563 2.646,3.792 0.333,0.229 10 false *5 2.365,2.292 2.76,2.531 0.396,0.24 10 false *6 2.417,1.073 2.729,1.229 0.313,0.156 10 false *7 3.5,0.302 3.813,0.458 0.313,0.156 10 false *a 3.781,0.521 4.094,0.677 0.313,0.156 10 false *b 3.792,2.594 4.104,2.75 0.313,0.156 10 false *c
*1 Absorber Cap *2 Rebound Stopper
*3 Digressive Type Piston Valve *4 Base Valve
*5 Oil *6 Low-pressure (N2) Gas
*7 Oil Seal - -
*a Extension Passage *b Very Low Piston Speed
*c Middle/High Piston Speed - -





f.

Models for Europe

i.

By optimizing the friction of the shock absorber, a rear shock absorber that is responsive right from the start of movement has been achieved. As sufficient damping force can be obtained even at very low piston speeds, an enhanced steering response, comfortable flat ride and high quality feel have been achieved.

X141445C01
1.719,2.354 2.271,2.354 true 1.677,3.01 1.979,3.01 true 1.708,3.938 2.01,3.938 true 2.417,3.552 2.927,3.552 true 2.531,2.49 2.958,2.49 true 2.49,1.573 2.865,1.135 2.865,1.135 3.031,1.135 true 1.719,1.104 1.906,1.104 1.906,1.104 2.177,1.49 true 1.552,1.042 1.865,1.198 0.313,0.156 10 false *1 1.542,2.281 1.854,2.438 0.313,0.156 10 false *2 1.49,2.958 1.802,3.115 0.313,0.156 10 false *3 1.531,3.885 1.844,4.042 0.313,0.156 10 false *4 2.99,3.49 3.323,3.719 0.333,0.229 10 false *5 3.021,2.427 3.417,2.667 0.396,0.24 10 false *6 3.104,1.073 3.417,1.229 0.313,0.156 10 false *7 4.615,1.813 4.927,1.969 0.313,0.156 10 false *a 5.677,1.781 5.99,1.938 0.313,0.156 10 false *b
*1 Absorber Cap *2 Rebound Stopper
*3 Multi-leaf Type Linear Control Valve *4 Base Valve
*5 Oil *6 Low-pressure (N2) Gas
*7 Oil Seal - -
*a Extension Passage *b Compression Passage