Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › 2019.02–2021.02
NM33C0E _56 Audio / Visual / Telematics _067379 PARK ASSIST / MONITORING _0337353 TOYOTA PARKING ASSIST-SENSOR SYSTEM DE DETAILS F

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  DETAILS  CLEARANCE WARNING BUZZER  


OPERATION


a.

Depending on the detection distance and the detection area, the sound pattern of the No. 1 clearance warning buzzer will vary.

Detection Area Detection Distance
(mm (in.))
Buzzer Sound Pattern
On
(msec.)
Off
(msec.)

*: Models with TOYOTA parking assist-sensor system (8-sensor type)

Front Corner Long 600 +/- 60 to 450 +/- 50 (23.6 +/- 2.4 to 17.7 +/- 2.0) 200 200
Middle 450 +/- 50 to 350 +/- 40 (17.7 +/- 2.0 to 13.8 +/- 1.6) 100 100
Short 350 +/- 40 or less (13.8 +/- 1.6 or less) Continuous Sound 0
Front Center* Longest 1000 +/- 100 to 600 +/- 60 (39.4 +/- 3.94 to 23.6 +/- 2.4) 200 500
Long 600 +/- 60 to 450 +/- 50 (23.6 +/- 2.4 to 17.7 +/- 2.0) 200 200
Middle 450 +/- 50 to 350 +/- 40 (17.7 +/- 2.0 to 13.8 +/- 1.6) 100 100
Short 350 +/- 40 or less (13.8 +/- 1.6 or less) Continuous Sound 0
Rear Corner Long 600 +/- 60 to 450 +/- 50 (23.6 +/- 2.4 to 17.7 +/- 2.0) 200 200
Middle 450 +/- 50 to 350 +/- 40 (17.7 +/- 2.0 to 13.8 +/- 1.6) 100 100
Short 350 +/- 40 or less (13.8 +/- 1.6 or less) Continuous Sound 0
Rear Center* Longest 1500 +/- 150 to 600 +/- 60 (59.1 +/- 5.9 to 23.6 +/- 2.4) 200 500
Long 600 +/- 60 to 450 +/- 50 (23.6 +/- 2.4 to 17.7 +/- 2.0) 200 200
Middle 450 +/- 50 to 350 +/- 40 (17.7 +/- 2.0 to 13.8 +/- 1.6) 100 100
Short 350 +/- 40 or less (13.8 +/- 1.6 or less) Continuous Sound 0


b.

When a sensor malfunction is detected or a sensor is frozen or dirty, the buzzer sounds 5 times according to the following timing:

Y111462E06
0.771,1.938 1.219,2.115 0.448,0.177 10 false Buzzer 1.365,1.844 1.688,2.073 0.323,0.229 10 false ON 1.292,2.167 1.625,2.396 0.333,0.229 10 false OFF 0.427,1.292 1.656,1.677 1.229,0.385 10 false Approximately 0.25 seconds 3.146,0.875 5.49,1.052 2.344,0.177 10 false Approximately 1.5 seconds 3.438,0.5 5.781,0.677 2.344,0.177 10 false Approximately 7.5 seconds 3.156,1.354 5.552,1.531 2.396,0.177 10 false Approximately 0.75 seconds


c.

The ultrasonic sensors are divided into 2 groups: a front section group (front corners and front center) and a rear section group (rear corners and rear center). If multiple ultrasonic sensors detect obstructions at the same time, the No. 1 clearance warning buzzer sounds as follows, in accordance with the detection distance and detection area of each group:

Buzzer Sound Pattern ON/OFF Time (msec.)

*A: Front section

*B: Rear section

Detection Distance Short (*B) Middle (*B) Long (*B) Longest (*B) Not detected
Short (*A) Timing 1 Timing 2 Timing 2 Timing 2 Continuous Sound
Middle (*A) Timing 2 100/100 100/100 100/100 100/100
Long (*A) Timing 2 100/100 200/200 200/200 200/200
Longest (*A) Timing 2 100/100 200/200 200/500 200/500
Not detected Continuous Sound 100/100 200/200 200/500 None

Y134649E01
2.229,0.896 2.438,0.458 2.438,0.458 2.646,0.458 true 2.531,1.354 2.688,1.063 2.688,1.063 3.156,1.063 true 0.24,0.188 0.938,0.458 0.698,0.271 10 false [Timing 1] 2.698,0.375 4.49,0.583 1.792,0.208 10 false Approximately 0.5 seconds 3.208,0.979 5.01,1.229 1.802,0.25 10 false Approximately 0.25 seconds 0.208,0.885 1.115,1.333 0.906,0.448 10 false Approximately 0.05 seconds 0.604,1.656 0.917,1.854 0.313,0.198 10 false ON 0.583,1.948 1.042,2.146 0.458,0.198 10 false OFF 0.104,1.771 0.583,2.01 0.479,0.24 10 false Buzzer 0.583,4.292 1.042,4.49 0.458,0.198 10 false OFF 0.583,4 0.896,4.198 0.313,0.198 10 false ON 0.115,4.146 0.594,4.396 0.479,0.25 10 false Buzzer 0.25,2.573 0.948,2.844 0.698,0.271 10 false [Timing 2] 0.125,3.208 1.031,3.656 0.906,0.448 10 false Approximately 0.05 seconds 2.833,3.188 4.625,3.396 1.792,0.208 10 false Approximately 1.5 seconds 3.854,3.74 5.635,3.958 1.781,0.219 10 false Approximately 0.85 seconds


d.

Clearance Warning Buzzer Mute Function

i.

When an obstruction is detected and the buzzer is sounding, the buzzer can be muted by operating the multi-information display with the steering pad switch assembly.


ii.

The temporary mute function is cancelled when any of the following conditions are met:

·

The shift position is changed.

·

The vehicle speed is over certain value.

·

An abnormal sensor (open circuit or frozen sensor) is detected or a sensor cannot be utilized (CAN communication malfunction).

·

The clearance sonar system is turned off.

·

The power switch is turned off.


HINT:

If a new obstacle is detected, the temporary mute function is cancelled and the buzzer sounds.