OPERATING CONDITION
When all of the following conditions have been met, the forward recognition with heater hood sub-assembly operates.
The power switch is turned ON.
The outside air temperature is approximately 10°C or less.
A few minutes have elapsed since the forward recognition with heater hood sub-assembly operation stopped.
After the forward recognition with heater hood sub-assembly operates, the operation will stop when a certain length of time has elapsed.
Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).
CONSTRUCTION
The forward recognition with heater hood sub-assembly is positioned in the forward recognition bracket. The forward recognition with heater hood sub-assembly prevents condensation on the windshield in front of the forward recognition camera.
| *a | Sheet Heater (Heating Element) | *b | Temperature Fuse (Built-in parts) |