Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › from 2021.02
NM33C0E _56 Audio / Visual / Telematics _068417 NAVIGATION / MULTI INFO DISPLAY _0470836 NAVIGATION SYSTEM DE DETAILS F

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  DETAILS  MULTI-DISPLAY  


FUNCTION


a.

A wide viewing angle, high contrast 9-inch display is installed to the center of the instrument panel.


b.

The color setting of the map can be changed depending on the users preference.


c.

A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-display of the radio and display receiver assembly. The multi-display shows the audio screen, Bluetooth hands-free screen, vehicle information screen, etc. and can be operated using touch operation, flick operation*, pinch in/pinch out* or drag operation*.

HINT:

*: Flick operation or drag operation may not be possible on all screens.


Y250744C02
5.052,1.719 5.365,1.917 0.313,0.198 10 false *b 1.896,1.656 2.208,1.854 0.313,0.198 10 false *a 0.167,0.115 0.479,0.313 0.313,0.198 10 false *e 5.073,3.458 5.385,3.656 0.313,0.198 10 false *d 1.865,3.448 2.177,3.646 0.313,0.198 10 false *c
*a Touch Operation *b Flick Operation
*c Drag Operation *d Pinch In/Pinch Out Operation
*e The illustrations shown are examples only. The illustrations may differ from the actual audio head unit. - -



d.

The audio source can be switched on the audio source selection screen. The arrangement of the audio sources displayed on the audio source screen can be changed according to the frequency of use.


e.

A fuel consumption screen is provided in consideration of the environment.


f.

The home screen can display multiple information screens.


g.

The screen can be divided into multiple display areas, and the audio screen, hands-free screen, vehicle information screen, etc. can be displayed in each desired area at the same time.


h.

An area to display the status bar in which the clock, connection status of a Bluetooth device, etc. can be checked has been provided.


i.

The user can check the current time, Bluetooth connection status, signal strength, remaining battery level of a cellular phone, etc. using the status bar display.


j.

The fuel consumption screen displays information or history of the fuel consumption per minute or per trip, drivable distance, etc.

HINT:

Information displayed on the screen may slightly differ from the actual.



k.

The maximum fuel consumption and average fuel consumption is displayed, and the average fuel consumption information since the last reset until now is displayed on a graph.


l.

If "Clear" is selected on the screen, the average fuel consumption information is reset, the average fuel consumption information up to that time is reset, the average fuel consumption information up to that time is recorded, and a new recording is started.


m.

The displayed maximum fuel consumption will be updated when the average fuel consumption exceeds the displayed maximum fuel consumption.


n.

Directions of energy transmission are displayed to indicate the current drive (engine, motor or both), charging status of the engine and the usage status of regenerated power.


o.

The energy monitor status calculated by the hybrid vehicle control ECU assembly is displayed.