Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2021.02
NM33C0E _56 Audio / Visual / Telematics _068416 AUDIO / VIDEO _0336838 AUDIO AND VISUAL SYSTEM DE DETAILS F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  DETAILS  BLUETOOTH COMMUNICATION  


"Bluetooth" OUTLINE


a.

"Bluetooth" is a worldwide wireless communication standard widely used as a short range communication tool.

E215384C34
2.406,0.865 2.594,1.031 0.188,0.167 10 false *b 3.583,1.896 3.771,2.063 0.188,0.167 10 false *c 4.573,1.948 4.969,2.26 0.396,0.313 10 false *1 5.563,1.896 5.75,2.063 0.188,0.167 10 false *d 4.021,1.385 4.208,1.552 0.188,0.167 10 false *e 5.125,1.385 5.313,1.552 0.188,0.167 10 false *e 0.073,0.052 0.26,0.219 0.188,0.167 10 false *a
*1 Radio and Display Receiver Assembly
(Built-in "Bluetooth" Antenna)
- -
*a The illustrations shown are examples only. The illustrations may differ from the actual audio head unit. *b Cellular Network
*c Cellular Phone
("Bluetooth" Compatible Type)
*d Portable Audio Player
("Bluetooth" Compatible Type)
*e "Bluetooth" Wireless Connection - -



b.

"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.


c.

"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

HINT:

The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.

Y120856

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.



d.

Hands-free function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

*: Some versions of "Bluetooth" compatible cellular phones may not function properly.


ii.

The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.


iii.

Compatible hands-free devices

Required "Bluetooth" specifications Ver. 1.1/2.0 or higher (Ver. 4.2 recommended)
Compatible profiles
·

HFP (Hands-Free Profile) Ver. 1.0 or higher (Ver. 1.7 or higher recommended)*1

·

OPP (Object Push Profile) Ver. 1.1 or higher (Ver. 1.2 or higher recommended)*2

·

PBAP (Phone Book Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)*2

·

SPP (Serial Port Profile) Ver. 1.1 or higher (Ver. 1.2 or higher recommended)*3

·

MAP (Message Access Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)*4


Maximum number of hands-free devices that can be registered (including audio devices) 5

*1: This profile is necessary when using the hands-free function.

*2: This profile is necessary when transferring the phonebook data.

*3: This profile is necessary when using the application link function. (w/ Application Link Function)

*4: This profile is necessary when using the message function (w/ SMS/MMS/e-mail Function).


HINT:
·

The amount of remaining battery charge displayed on the radio and display receiver assembly may be different from that of the "Bluetooth" device.

·

Some profiles described above may not be supported by the system depending on the audio head unit equipped.

·

If the specification of the connected Bluetooth phone is lower than the recommended or does not support the functions required, the available functions may be limited.

·

If a Bluetooth-compatible cellular phone does not support the Hands Free Profile (HFP), the cellular phone cannot be registered or data transmission such as Object Push Profile (OPP), SPP (Serial Port Profile) or Phone Book Access Profile (PBAP), Message Access Profile (MAP) may not be available.

·

When multiple Bluetooth-compatible devices are registered, the user can select different devices for the Bluetooth audio system and Bluetooth hands-free system.

·

The connection history of Bluetooth devices is stored in the internal memory of the audio head unit. The stored data can be exported to a USB memory device as a connection history file, which can be checked using the TechStream.

·

The Bluetooth hands-free system is included in the audio head unit.




iv.

When a Bluetooth phone is connected to the audio head unit, e-mails and Short Message Service (SMS) messages received on the phone can be displayed or read out. In addition, it is possible to reply to the received e-mails and Short Message Service (SMS) messages. (Messages may not be displayed depending on the message service or profile that the connected Bluetooth phone supports.)



e.

"Bluetooth" audio function

i.

The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio and display receiver assembly.

*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the radio and display receiver assembly may be limited.


ii.

Compatible "Bluetooth" audio devices

Required "Bluetooth" specifications Ver. 1.1/2.0 or higher (Ver. 4.2 recommended)
Compatible profiles
·

A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)

·

AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)


Maximum number of audio devices that can be registered (including hands-free devices) 5

HINT:
·

When multiple Bluetooth-compatible devices are registered, the user can select different devices for the Bluetooth audio system and Bluetooth hands-free system.

·

The connection history of Bluetooth devices is stored in the internal memory of the audio head unit. The stored data can be exported to a USB memory device as a connection history file, which can be checked using the TechStream.

·

The functions of the Bluetooth audio system that can be used vary with the version of the Audio/Video Remote Control Profile (AVRCP) supported by the Bluetooth audio player that is being used.

·

The Bluetooth audio control system is built into the audio head unit.

·

Up to 5 Bluetooth compatible devices can be registered.