FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
|
*1: w/ Stereo Component Amplifier Assembly *2: w/o Stereo Component Amplifier Assembly *3: w/ Telematics Transceiver *4: w/ DAB Function *5: w/ Navigation Antenna Assembly *6: w/ Headup Display System *7: w/ Cooler Control Switch Assembly |
|
| Radio and Display Receiver Assembly | ·
Outputs the audio signal of the selected audio source to the stereo component amplifier assembly.*1 ·
Outputs the audio signal of the selected audio source to the speakers.*2 ·
Sends each sound source and hands-free system status to the combination meter. ·
The radio and display receiver assembly supports HD data services that enable the audio and visual system to receive and use information from HD Radio signals. |
| Speakers | Output the audio sounds. |
| Stereo Component Amplifier Assembly*1 | Amplifies audio signals sent from the radio and display receiver assembly and sends them to the speakers. |
| Window Glass Antenna Wire
·
AM ·
FM Main ·
FM Sub ·
DAB*4 |
·
Receives AM/FM radio broadcasts via the rear window glass antenna printed antenna array. (AM/FM) ·
Receives digital audio broadcasts via the rear window glass antenna printed antenna array. (DAB)*4 |
| No. 1 Amplifier Antenna Assembly | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. |
| No. 2 Amplifier Antenna Assembly | Amplifies radio broadcasting signals from the radio antenna and sends them to the radio and display receiver assembly. |
| Telematics Transceiver*3 | Transmits and receives data from the data center. |
| Navigation Antenna Assembly*5
·
GPS |
Receives signals from GPS satellites and transmits these signals to the radio and display receiver assembly. |
| Roof Antenna Assembly*3
·
GPS |
|
| Digital Audio Broadcasting Antenna Assembly*4 | Amplifies digital audio broadcasts signals from the DAB antenna and sends them to the radio and display receiver assembly. |
| Meter Mirror Sub-assembly*6 | Displays various information on the head up display sent from the radio and display receiver assembly via local bus communication. |
| Steering Pad Switch Assembly | Sends operation signals such as volume adjustment, mode selection and song selections to the radio and display receiver assembly. |
| Cooler Control Switch Assembly*7 | Sends operation signals from switches such as the channel up/down switch, tune up/down switch, volume up/down switch, power switch and mode switch operation to the radio and display receiver assembly. |
| Telephone Microphone Assembly | ·
Detects voice during hands-free conversations and voice commands. ·
Is installed in the map light assembly and converts sound waves to an electrical signal and sends it to the radio and display receiver assembly. |
| No. 1 Stereo Jack Adapter Assembly | ·
When a USB memory device, portable audio player (USB type) or Apple device is connected, communicates with the radio and display receiver assembly via USB. |
| Combination Meter Assembly | ·
Displays various information and operation signals on the multi-information display sent from the radio and display receiver assembly via local bus communication. ·
Sends the vehicle speed signal to the radio and display receiver assembly. |
| Parking Brake ECU (Brake Actuator Assembly) | Sends the parking brake position signal to the radio and display receiver assembly. |
| Instrument Panel Junction Block Assembly
·
BKUP LP Relay |
Sends the R shift position signal to the radio and display receiver assembly. |
DIAGNOSIS
For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.