Home › Drivetrain › P710 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM33C0E _52 Drivetrain _065428 P710 HYBRID TRANSMISSION / TRANSAXLE _0319557 SHIFT LEVER KNOB A

P710 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C380408

Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.


b.
C380409C01
0.781,1.26 0.917,1.083 0.917,1.083 1.052,1.083 true 1.844,1.552 1.979,1.552 1.979,1.552 2.156,0.958 true 1.073,0.979 1.365,1.198 0.292,0.219 10 false *a 1.646,1.458 1.833,1.656 0.188,0.198 10 true *b
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.