Home › Drivetrain › P710 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM33C0E _52 Drivetrain _065428 P710 HYBRID TRANSMISSION / TRANSAXLE _0319557 SHIFT LEVER KNOB A

P710 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  INSTALLATION  


PROCEDURE

Hide 33504F 1.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C380410

Install the shift lever knob sub-assembly to the transmission floor shift assembly.


b.
C380411

Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.

NOTICE:

Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.