Home › Engine / Hybrid System › A25A-FXS (FUEL) › FUEL PUMP (w/ Canister Pump Module)
RM33C0E _51 Engine / Hybrid System _065421 A25A-FXS FUEL _0319774 FUEL PUMP(w/ Canister Pump Module) A

A25A-FXS FUEL  FUEL PUMP(w/ Canister Pump Module)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A456283C01
0.75,0.99 0.917,0.99 0.917,0.99 1.083,1.24 false 0.75,3.333 0.917,3.333 0.917,3.333 1.167,3.583 false 0.406,2.385 0.781,2.625 0.375,0.24 12 false *B 0.385,0.125 0.76,0.365 0.375,0.24 12 false *A 0.552,0.906 0.865,1.104 0.313,0.198 10 false *a 0.552,3.25 0.865,3.448 0.313,0.198 10 false *a
*A for Type A
*B for Type B
*a Tube


Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.


PROCEDURE

Hide 23221 2.REMOVE FUEL PUMP

a.

for Type A:

i.
A405230

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.

NOTICE:
·

Do not damage the wire harness.

·

When disengaging each wire harness from the clamp, disengage one wire at a time.




ii.

Disconnect the 2 fuel pump harness connectors.


iii.
A405223C01
2.594,1.042 3.156,1.042 true 3.208,0.958 3.427,1.156 0.219,0.198 10 false *1
*1 Fuel Suction Plate Sub-assembly
V100135

Pull
V100136

Slide


Disengage the claw and slide the fuel suction plate sub-assembly and then separate it from the fuel sub-tank sub-assembly.


iv.
A405225

Disengage the 4 claws and remove the fuel suction plate sub-assembly from the fuel sub-tank sub-assembly.


v.
A405226

Disengage the claw and clamp, and disconnect the fuel pump harness.


vi.
A405228

Disconnect the fuel pump harness connector.


vii.
A405227C02
2.573,2.865 2.573,2.531 false 2.5,2.896 2.813,3.052 0.313,0.156 10 false *a
*a Fuel Tube Supporter


Disengage the 3 claws and remove the No. 2 fuel suction support from the fuel tube supporter.


viii.
A405320

Remove the fuel pump from the fuel tube supporter.


ix.
A405229C02
1.167,0.781 1.521,0.781 true 1.177,0.969 1.531,0.969 true 0.99,0.698 1.302,0.854 0.313,0.156 10 false *1 0.99,0.906 1.302,1.063 0.313,0.156 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Remove the O-ring and fuel pump spacer from the fuel pump.



b.

for Type B:

i.
A456284

Disengage the clamp to disconnect the fuel pump harness from the fuel suction plate sub-assembly.

NOTICE:
·

Do not damage the wire harness.

·

When disengaging each wire harness from the clamp, disengage one wire at a time.




ii.

Disconnect the 2 fuel pump harness connectors.


iii.
A456285C01
2.552,0.969 2.938,0.969 true 2.969,0.896 3.167,1.052 0.198,0.156 10 true *1
*1 Fuel Suction Plate Sub-assembly
V100135

Pull
V100136

Slide


Disengage the claw and slide the fuel suction plate sub-assembly and then separate it from the fuel sub-tank sub-assembly.


iv.
A456286

Disengage the 4 claws and remove the fuel suction plate sub-assembly from the fuel sub-tank sub-assembly.


v.
A456287

Disengage the claw and disconnect the fuel pump harness.


vi.
A456288

Disconnect the fuel pump harness connector.


vii.
A456289C01
0.708,3.073 0.708,2.74 true 0.646,3.094 0.958,3.25 0.313,0.156 10 false *a
*a Fuel Tube Supporter


Disengage the 3 claws and remove the No. 2 fuel suction support from the fuel tube supporter.


viii.
A456290

Remove the fuel pump from the fuel tube supporter.


ix.
A405229C02
1.167,0.781 1.521,0.781 true 1.177,0.969 1.531,0.969 true 0.99,0.698 1.302,0.854 0.313,0.156 10 false *1 0.99,0.906 1.302,1.063 0.313,0.156 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Remove the O-ring and fuel pump spacer from the fuel pump.