Home › Engine / Hybrid System › A25A-FXS (LUBRICATION) › OIL PUMP
RM33C0E _51 Engine / Hybrid System _065425 A25A-FXS LUBRICATION _0320114 OIL PUMP A

A25A-FXS LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL OIL PUMP REGULATOR RING

a.
A404813C01
1.969,1 2.531,0.625 2.531,0.625 2.698,0.625 true 1.885,2.052 1.708,2.052 1.708,2.052 1.625,1.667 true 1.51,0.792 1.375,0.438 1.375,0.438 1.24,0.438 true 1.51,0.865 1.094,0.938 1.094,0.938 0.938,0.938 true 1.229,1.625 0.792,1.51 0.792,1.51 0.677,1.51 true 1.188,1.708 0.802,1.885 0.802,1.885 0.667,1.885 true 1.031,0.323 1.344,0.521 0.313,0.198 10 false *1 2.76,0.51 3.073,0.708 0.313,0.198 10 false *2 1.969,1.979 2.281,2.177 0.313,0.198 10 false *3 0.74,0.865 1.052,1.063 0.313,0.198 10 false *4 0.51,1.438 0.823,1.635 0.313,0.198 10 false *4 0.5,1.802 0.813,2 0.313,0.198 10 false *1
*1 Oil Pump Regulator Vane
*2 Oil Pump Regulator Ring
*3 Oil Pump Relief Valve Spring
*4 Vane Spring


Install the oil pump regulator ring to the oil pump body.


b.

Install the 2 oil pump regulator vanes and 2 vane springs to the oil pump body.


c.

Install the oil pump relief valve spring to the oil pump body.


Hide 2.INSTALL OIL PUMP DRIVEN ROTOR

a.
A404812

Install the oil pump driven rotor to the oil pump regulator ring.


Hide 3.INSTALL OIL PUMP COVER SUB-ASSEMBLY

a.
A402216C01
1.49,1.25 1.219,1.375 1.219,1.375 1.438,1.177 true 1.042,1.417 1.281,1.615 0.24,0.198 10 true *a
*a Mark


Coat the oil pump drive rotor and oil pump driven rotor with engine oil, and place them into the oil pump body with the marks facing the oil pump cover sub-assembly side.


b.
A402211

Install the oil pump cover sub-assembly to the oil pump body with the 5 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)


Hide 4.INSTALL OIL PUMP RELIEF VALVE

a.
A402210C01
2.281,2.521 2.104,2.521 2.104,2.521 1.844,2.219 false 1.781,2.906 1.604,2.906 1.604,2.906 1.344,2.604 false 1.365,3.271 1.188,3.271 1.188,3.271 0.927,2.969 false 2.344,2.417 2.656,2.615 0.313,0.198 10 false *1 1.844,2.802 2.156,3 0.313,0.198 10 false *2 1.427,3.177 1.74,3.375 0.313,0.198 10 false *3
*1 Oil Pump Relief Valve
*2 Oil Pump Relief Valve Spring
*3 Oil Pump Relief Valve Plug


Coat the oil pump relief valve with engine oil.


b.

Insert the oil pump relief valve and oil pump relief valve spring into the oil pump cover sub-assembly.


c.

Using a 27 mm socket wrench, install the oil pump relief valve plug to the oil pump cover sub-assembly.

Torque:
53 N*m (540 kgf*cm, 39 ft.*lbf)